Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suspension Lift + Body Lift + Extended Shackels

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 30
Joined: Sun Jun 26, 2005 5:45 pm

Suspension Lift + Body Lift + Extended Shackels

Post by @cer »

Hi eveyone,

Im getting my Hilux 1990 SR5 LN106R lifted 2" next week and also getting 2" body blocks put in.

What I am wondering is if I will need to extend my brake lines for this? Also, does the radiator need to be repositioned?

Is there anything else that will need to be modified to accomodate the 2" suspension and 2" body lift?

Next question is, if I was to also install 200mm extended shackels to the lux would anything need to be modified to have everything aok?

Also, will 33" tyres fit under the 2" suspension and 2" body lift easily and at full flex?

Will 35" tyres fit under the 2" suspension, 2" body and 200mm extended shackels?

Thanks guys and sorry about all the q's!
Posts: 135
Joined: Wed Jul 13, 2005 6:44 pm
Location: Central Coast NSW

Re: Suspension Lift + Body Lift + Extended Shackels

Post by Sneddo »

There will be enough length in the brake lines, yes you will need to ajust the radiator, if you have a well back ute the fuel filler may not line up with the cap hole, you may need a steering shaft spacer... engineers like to see one. Ive got a 91 model used to have 35's with 4" body lift and just cleared guards nicely, now dropped down to 2" body lift and 4" suspention :cool:

Im guessing the 200mm extended shackles is a typo if not there some HUGE BITCH shackles?? I run climax drop shackles

let me know how you go
Matt
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

you mean 200mm e2e right? thats what i run..
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Re: Suspension Lift + Body Lift + Extended Shackels

Post by benhl »

@cer wrote:
What I am wondering is if I will need to extend my brake lines for this? Also, does the radiator need to be repositioned? Brake lines - no, Radiator no, just remove the bottom section of the fan shroud and it should be fine, mine was just a clip out afair. Unless you have V8 or alike

Is there anything else that will need to be modified to accomodate the 2" suspension and 2" body lift? Susp - no, BL - will need to expand solid coiled section of brake lines under bonnet, maybe steering spacer - i didn't need to, fuel filler as mentioned lengthened or adjusted to ensure it works, possible strech some wiring from chassis to body.
Next question is, if I was to also install 200mm extended shackels to the lux would anything need to be modified to have everything aok? Rear of truck will sit noticable higher than front. Unless 200mm E2E are going in the front also.

Also, will 33" tyres fit under the 2" suspension and 2" body lift easily and at full flex? Depends on tub back or tray.... 2+2 &33's will fit, may rub on rear of the front at full flex and definately will rub on full flex and full lock.

Will 35" tyres fit under the 2" suspension, 2" body and 200mm extended shackels? No - Front diff must come fwd.

Thanks guys and sorry about all the q's!
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Post Reply

Who is online

Users browsing this forum: No registered users and 83 guests