OK, whats needed to fit them. By this i mean, body lift, gaurd mods, etc, etc. NEED to know this before i spend the $$$ on them
Oh, and the suspension lift will most likely be 6"
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
35's on a 80 series??
Moderators: toaddog, Elmo, DUDELUX
35's on a 80 series??
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Firstly is it pre 94?
94 onwards from memory can only run a 16" rim without mods to the rear brakes where as pre this date can still do with 15"
eitherway 2" suspension and 2" body
or 4" suspension, both will give varying degrees of scrub on the guards, but again this all depends on the spring type and if you keep the sway bars
94 onwards from memory can only run a 16" rim without mods to the rear brakes where as pre this date can still do with 15"
eitherway 2" suspension and 2" body
or 4" suspension, both will give varying degrees of scrub on the guards, but again this all depends on the spring type and if you keep the sway bars
Bugger!! Its a 95 model.......
I am 99% sure i will have a 6" lift once the tax man makes his yearly offering....i dont REALLY want to do a bodylift anytime soon
Phill
I am 99% sure i will have a 6" lift once the tax man makes his yearly offering....i dont REALLY want to do a bodylift anytime soon
Phill
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
they will fit easily with 6" or even with 4", scrub will be minimal. late model 80's do have larger rear brakes which will only clear 16" rims but the brake caliper can be shaved approx 3mm to fit 15" rims, alternatively modifying your rims fofr maximum offset or using wheel spacers (1 - 1.5" is plenty) will also clear the brakes with 15" rims. alloy rims are a no go.
Who is online
Users browsing this forum: No registered users and 0 guests