Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil top up on t case 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 32
Joined: Wed Mar 30, 2005 5:46 pm
Location: central coast nsw

oil top up on t case 80

Post by crusher »

Can anyone tell me where the filler bolt is on the back of the 80 transfer case.Drain plug is right at the bottom & there's another bolt (that is rounding off instead of coming undone) a couple of inches up & to the left.Is this the filler plug or is it the other bolt right at the top of the case at the rear?I realy need to buy a manual!!
Top
Posts: 6
Joined: Mon Mar 29, 2004 8:28 am
Location: Tecoma

Post by lance475 »

The one that is rounding off is the filler plug. A" Metrinch" socket which grips the flats rather than the corners of the bolt should get it off.
Top
Posts: 32
Joined: Wed Mar 30, 2005 5:46 pm
Location: central coast nsw

bolt

Post by crusher »

thanks mate. i thought it was,just wanted to make sure
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests