Any idea what the size of the coolant temperature sender is in a County 110? I have a 4.6L block with 3.5L top end and the sender has given up the ghost (VDO gauge). Went to pull it out and coolant started coming out so didn't want to take it all the way out as I didn't have any spare coolant at home.
1/8 - 27 NPT
1/4 - 18”
3/8 - 18 or;
1/2 - 14”
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Temperature Sender size
Moderator: Micka
This is why this is such a brain teaser.
JSTTRY has a 4.6 with a 3.5 top end.
OK, if it is a carby inlet manifold it will be NPTF.
If it is a 3.5 injection manifold it will be NPTF (I think)
If it is a 3.9 injection manifold it will be metric.
That is if someone has not just run a tap through the manifold to suit whatever sender he had!!!!
Really JSTTRY, its impossible for anyone on this forum to say with any certainty what you have because it is not standard. You have to suck it and see in these circumstances. Isn't there an instrument shop in Darwin you can trundle along to?
Regards Philip A
JSTTRY has a 4.6 with a 3.5 top end.
OK, if it is a carby inlet manifold it will be NPTF.
If it is a 3.5 injection manifold it will be NPTF (I think)
If it is a 3.9 injection manifold it will be metric.
That is if someone has not just run a tap through the manifold to suit whatever sender he had!!!!
Really JSTTRY, its impossible for anyone on this forum to say with any certainty what you have because it is not standard. You have to suck it and see in these circumstances. Isn't there an instrument shop in Darwin you can trundle along to?
Regards Philip A
Not really, most of the stock has to come out of interstate which is why I was hoping to get it right the first time so I didn't have to wait around 
There is limited knowledge of Land Rovers I've found up here too so thought I might tap into the knowledge of the forum instead.
It has 3.5L manifold with twin carbies so will try out the NPTF version. I notice VDO do a universal fit kit which various sizes included, I might try that.
There is limited knowledge of Land Rovers I've found up here too so thought I might tap into the knowledge of the forum instead.It has 3.5L manifold with twin carbies so will try out the NPTF version. I notice VDO do a universal fit kit which various sizes included, I might try that.
rmove sender place cork in hole take sender to shop buy new.jsttry wrote:Not really, most of the stock has to come out of interstate which is why I was hoping to get it right the first time so I didn't have to wait around
It has 3.5L manifold with twin carbies so will try out the NPTF version. I notice VDO do a universal fit kit which various sizes included, I might try that.
Re fit.
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
I found the part number for the guage, 310-302.
You wouldn't believe it but I took the sender to a shop and they couldn't tell me which one I needed even with the guage part number so I brought 3 different senders (which they didn't even have in their instore catalog
Got home and checked the VDO site and found they are all 40-120deg units with M15x1.5 threads but they all have different ohm ratings.
You wouldn't believe it but I took the sender to a shop and they couldn't tell me which one I needed even with the guage part number so I brought 3 different senders (which they didn't even have in their instore catalog
Got home and checked the VDO site and found they are all 40-120deg units with M15x1.5 threads but they all have different ohm ratings.
Who is online
Users browsing this forum: No registered users and 0 guests