Turned on the Air Con yesterday and cold air only came out of
the windscreen vents... Moved the control to face position ...and
nothing happened.No matter which position it is put on it just comes
out of the windscreen vents. Can onyone shed some light on what
could be wrong, and how to go about fixing it?? Temperiture is nice
and cold it just won't flow onto the car.. P.S. Jeep is a 1997 Grand
Cherokee Laredo
Cheers Barry
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air Conditioning
Moderator: GUtripper
My TJ had the same fault. The air vent control is vacuum/pressure operated in a TJ. If it is the same deal in your Laredo, then look for any disconnected air lines behind the control. There should also be a small black plastic box or similar as a vacuum/pressure resevoir connected via a T into the airline somewhere. I guess the airline connect to the intake manifold somewhere.
Just checked the TJ FSM, there is a "check valve" on the manifold takeoff too which may have failed. As I recall properly, my TJ would blow air on the windscreen when the engine was under load and then return to the desired setting when under light load - was a leaky vacuum system (dealer fixed under warranty so not sure which bit).
UPDATE... Took the Jeep to local Jeep dealer to get them to have a look
Was told that the problem was the Dryer--Receiver and that it would cost about $960. to have it fixed. Day before it was to go in a mate come around for a garage session, while checking out the Jeep we noticed a small spagetti sized hose at the back of the manifold that had rubbed a hole through it near the end .... cut it off and pushed it back on
problem solved.... ten seconds and a small snip...
I know who needs the small snip
The dealer has just lost a customer for life.......
Cheers barjen
Was told that the problem was the Dryer--Receiver and that it would cost about $960. to have it fixed. Day before it was to go in a mate come around for a garage session, while checking out the Jeep we noticed a small spagetti sized hose at the back of the manifold that had rubbed a hole through it near the end .... cut it off and pushed it back on
problem solved.... ten seconds and a small snip...
I know who needs the small snip
The dealer has just lost a customer for life.......
Cheers barjen
Who is online
Users browsing this forum: No registered users and 3 guests