Hi
Just wondering if anyone knows where I can get some 2" lift blocks for my wifes NJ
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2" lift blocks for a 92 NJ LWB.
Moderator: -Scott-
2" lift blocks for a 92 NJ LWB.
GQ SWB 5" lift + 2" body lift
blocks
hey shane,
theyre just body blocks the same as you would use for most forubies other than zooks that use sqaure i think, somewhere around 65mm round x 50mm long, or how ever high you want to lift it. cheapest would be to pick up some scrap ali bar from somehwere, i got mine for free
its sitting in the garage... otherwise the poly stuff will do if you can get it engineered, iv even heard poeple use stuff like boat trailer rollers 
im sure you can get them from somehwere as a kit but theyd cost a motza, just get high tensile bolts to match, 2" longer obviously, and thatll get you going in the right direction
dean
theyre just body blocks the same as you would use for most forubies other than zooks that use sqaure i think, somewhere around 65mm round x 50mm long, or how ever high you want to lift it. cheapest would be to pick up some scrap ali bar from somehwere, i got mine for free
its sitting in the garage... otherwise the poly stuff will do if you can get it engineered, iv even heard poeple use stuff like boat trailer rollers im sure you can get them from somehwere as a kit but theyd cost a motza, just get high tensile bolts to match, 2" longer obviously, and thatll get you going in the right direction
dean
Hi
Yeah i did the 2" lift on my MQ SWB which I brought the poly blocks off Ebay and got the blots from a place in Mackay. I was wondering if the diameter of the blocks are different or all they all universal. If they are all the same I will chase some up.
Without looking under the car, how many are needed?
Yeah i did the 2" lift on my MQ SWB which I brought the poly blocks off Ebay and got the blots from a place in Mackay. I was wondering if the diameter of the blocks are different or all they all universal. If they are all the same I will chase some up.
Without looking under the car, how many are needed?
GQ SWB 5" lift + 2" body lift
blockx
yeh shane, the diamater im pretty sure that works is somewhere aorund the 60mm-65mm, and for how many you need is it shorty or LWB>>> i think perhaps 8 for SWB and 10/12 for LWB, mines shorty someone else may be abkle to clear up for the LWB, and its also on here somewhere if you search youll find it
dean
dean
Who is online
Users browsing this forum: No registered users and 1 guest