Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco S1 Questions

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Contact:
Contact Shark

Disco S1 Questions

Post by Shark »

1. How do you take the steering wheel off??

2. Mine is on gas and petrol and sometimes it does not idle properly. It idles on 700rpm normally and sometimes it revs at 1500 and slowly goes down. So when changing gears it revs too high and makes changing gears difficult. Same for both pertrol and gas.
Anyone got any clues??

Thanks guys

Marc
Looking for a car
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

steering wheel on Disco S1 can be taken off by lifting out the Landrover badge, remove plastic cap, undo nut to top of thread lft wheel with knee under and belt nut with soft metal drift.

Base idle is out - instruction to adjuct are in Manual
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

Reddo wrote:steering wheel on Disco S1 can be taken off by lifting out the Landrover badge, remove plastic cap, undo nut to top of thread lft wheel with knee under and belt nut with soft metal drift.
You butcher! :shock:
Thanks,

Adam
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests