Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tie rod ends

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Tie rod ends

Post by duncan »

hoping some one can tell me are the tie rods on the rear steering arm the one behind the diff on a GQ the same tapers as the tie rod ends on your steering arm from the pitman arm to the knuckle as i want to make an adjustable steering arm and using a left and a right hand tie rod wil make adjusting the lenght easier

Buy the way has anyone got some old original bushes from the rear upper or lower control arms that they dont want as im looking for some

Laslty were is cheezy dose he have a web site yet if so what is the web address
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

yep, they are the same.
Use the female threaded ones if you want strength (30x1.5 fine)
Or the male threaded ones if you have to buy a tap (22x1.5 fine) - Much cheaper..
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests