Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wiring uhf antenna

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

wiring uhf antenna

Post by runnin4life »

hi all
i have a question about wiring my uhf antena(mods feel free to move to auto elec if its more suited)

would i wire the centre "core"part of the wire to the antenna and the braided outer part earth it out or is there another way

also
i wanted a spring base for my antenna and i had a spring base and other bits(the section labled with a ?) from one of those little solid wire ones with the coil about half way

all i did was take the little wire one off and put my bigger antenna on (the only place i could thread it on also circled in red)
have i lost you yet????

is there a problem running it this way ???
i will post a pic to clarify
You do not have the required permissions to view the files attached to this post.
Last edited by runnin4life on Thu Apr 20, 2006 4:11 pm, edited 1 time in total.
Top
Posts: 326
Joined: Mon Aug 23, 2004 10:50 am
Location: Oran Park, NSW

Post by festy »

Can't see your pic so can't answer your spring question, but you're right - the core goes to the antenna element, and the braid goes to earth. That's the only way to do it.
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

hmm not sure whats going on with the pics its works for now

cheers
elliot
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

As long as the spring still works and it picks up the channels.. It'll be right :armsup:

P.S - Nice toes.. lol
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

yep they look great with the calases on the big toes :lol:
im thinking of starting a new career
a toe model
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

It should come apart at the spring to s/s shaft junction. There should be an insulated point on the bottom of the s/steel part (coil normally covers it) that the center conductor should connect to, and the outer braid should connect to the coil spring near the junction as well. The coax is fed down through the middle of the spring and through the base of the spring, which screws down to your mouning surface with the coax coming out the bottom of the mount.

It is what they call a "ground plane independant" antenna, meaning you don't need an expanse of metal around the base of it for it to work properly.

Take it to a communications/radio shop and get them to attatch the coax, as if you get it wrong you can say goodnight to whatever you are going to plug it into.... $30 antenna vs $300 radio...it's woth the 10 or so buck you might get charged.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

yer im thinking take it to a place cus i wired it but havnt plugged it in yet or wired the uhf in yet
cheers
elliot
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 94 guests