Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tube clamps

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3
Joined: Wed Apr 19, 2006 11:19 am

Tube clamps

Post by brickcj7 »

hey guys
looking for tube clamps which are pictured below have been asking around different places but no one seems to be able to point me in the right direction have any of your seem them or know of where i might get them in australia
cheers
You do not have the required permissions to view the files attached to this post.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

x2.... to suit 32nb pipe :D
Top
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

X 3

I know you can get them from the states.
i don't need no stinking quote for my sig. line!
Top
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

http://www.mad4wd.com/tek9.asp?pg=produ ... c=jrgrkme0

heres a link
i don't need no stinking quote for my sig. line!
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

are you guys after those specific ones or just a similiar

wouldnt be to hard i would thing.
would need to have access to a cold saw, taps and drills and possibly a lathe beaybe to drill some pipe out to suit exact size

cheers
elliot
Top
Posts: 3
Joined: Wed Apr 19, 2006 11:19 am

Post by brickcj7 »

not after that specific product just something that does the same job and looks neat and tidy

have no idea about working with metal off any sort thats why i would like to find some one that either sells or can make them

if some one could make them locally i guess there would be a fair bit of interest so i think it could be worth while for some one who knows what they are doing

cheers
Top
User avatar
jav
Posts: 715
Joined: Wed Dec 03, 2003 10:19 am
Location: walloon, queensland

Post by jav »

do you want steel or alloy ones?, might look at makeing some
Top
Posts: 3
Joined: Wed Apr 19, 2006 11:19 am

Post by brickcj7 »

would perfer steel
Top
Posts: 130
Joined: Mon Jun 30, 2003 12:44 pm
Location: Melbourne

tube clamps

Post by davejb »

Ring around some of the industrial engineering suppliers.
Used to be able to get similar split clamps for large diameter drive shafts.
They are used joining long lengths of shafting on machines, the only down side will be one half will have a keyway broached in it. may be available in plain bore, worth a few phone calls
Dave
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 18 guests