Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS Hub spacers for Solid Axles (WTB)

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

IFS Hub spacers for Solid Axles (WTB)

Post by bj on roids »

I want some, soon, where can I buy them???

Who has the best price?
What is the $$?

Are these in stock, or will I be waiting around ages? Do the kist fit perfectly?
hands and mums dont count!!!
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

i got mine from Chaos4x4. i ordered them they turned up 2 days later :D

good price also as everything u need is in the kit (except the hubs & bearings)
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

hypolux wrote:i got mine from Chaos4x4. i ordered them they turned up 2 days later :D

good price also as everything u need is in the kit (except the hubs & bearings)


So did I. Good quality I have had them installed for about 2 months.


Chris
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

Chaos is the place to get em.


NICK
TECH SCREW GURU
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

How much???
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

POS wrote:How much???


i think i payed 280 inc freight ill have 2 dig out my recepit(sp?) so i can b sure
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

Ben with the chaos wide track hubs,where do you bolt the spacers , is it in the disc & hub, or is it behind the stub axle :?:
What do you need off the IFS hubs, did these cost much :?:
I'll ring your mob tomorrow after work [daywork] cause I wanna see yah bout some parts :idea:

Rob
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

Old Yella wrote:Ben with the chaos wide track hubs,where do you bolt the spacers , is it in the disc & hub, or is it behind the stub axle :?:
What do you need off the IFS hubs, did these cost much :?:
I'll ring your mob tomorrow after work [daywork] cause I wanna see yah bout some parts :idea:

Rob


the spacer bolts onto the back of the hub and then the standard solid front disk bolts 2 the spacer so that the disk runs in the same spot as normal.

the only bit needed from the ifs is the wheel hub itself u dont wanna use the ifs rotors coz u dont get as much pad - disk contact
Last edited by hypo on Sun Aug 03, 2003 10:16 pm, edited 1 time in total.
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

Cool thanks Ben :D
Rob
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

I talked to Richard from 4x4 engineering and he said he would do them so that i could bolt them on for $450 a pair. A bit exxy at the moment.

$280 for both sideds hypo?

anyone know if it is just the studs that line up the rotor? If so that is apparently bad as toyota have it so the rotor and hub are press fit. The press fit allows for less movement. Any thoughts? I am just curious!
hands and mums dont count!!!
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

when i had mine made, i had them made press fit and also the rotor bolted
to the spacer
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

bj on roids wrote:
$280 for both sideds hypo?



yes mate ill have 2 fine my receipt 2 b sure but it wasnt any more than 300 a pair
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

currently listed on the chaos site for $365
www.overkill4x4.com
ph 94766137
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests