just joined up so g,day all. i got extractors fitted to my 92 td42 would it
advisable to go for a bigger size pipe and different muffler to compliment
the extractors. cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq exhausts
G'day Andy, welcome to OL!
Mate I have been looking at doing the same thing, extractors and probably a 2 1/2 inch pipe until my TD42 finally gives up (490,000k's, want to make it to 500,000!), then V8.
Anyway below is an extract from another thread which will help you a little.
Cheers, Paul
Mate I have been looking at doing the same thing, extractors and probably a 2 1/2 inch pipe until my TD42 finally gives up (490,000k's, want to make it to 500,000!), then V8.
Anyway below is an extract from another thread which will help you a little.
Cheers, Paul
EXHAUSTFIX wrote:every one quotes pace maker extractors for these but i have found on some occations they can be a little big for tb42,spatrolpaul wrote:EXHAUSTFIX, I have a TD42 Patrol non turboed, I am looking at extractors and exhaust system. I know it has been mentioned in other strings but what system do you reccommend? Brand of extractors and type? Size of system 2.5"? Not worried about abit of sound. Has a standard system at the moment. Your help is greatly appreciated.
i prefer the cheeper brand of wildcat as they have a little more restriction and create better gas speed
if your not to worried about a bit of extra noise then sertainly go 2.5" with a large 11x5x18" strait through muffler in the front and a 5" round resenator in the rear
Who is online
Users browsing this forum: No registered users and 0 guests