Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

302 windsor into a swb mk

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 73
Joined: Mon Dec 12, 2005 10:19 pm
Location: Newcastle

302 windsor into a swb mk

Post by STARKEY »

As above I looking at putting a 302 Windsor from a 1982 Fairmont (on lpg) into a swb mk patrol that was a l28 four speed. I will still be using the four speed for now. Any advise as to adapters and expertise would be appreciated
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Personally I'd try and see if the 302 gearbox fits and use the MQ divorced tcase. It'll probably work out cheaper and easier if you can. Adapators cost a lot of money and there's lots of little issues with most of them.
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Why does the XE have a windsor in it?

It should be a cleveland if its a factory engine. Clevelands are bigger and might make the conversion more difficult.
Top
Posts: 73
Joined: Mon Dec 12, 2005 10:19 pm
Location: Newcastle

Post by STARKEY »

right you are. it is a clevland sorry. thanks for the correction.
come guys someboby must have done this before
Top
Posts: 228
Joined: Mon Oct 17, 2005 12:55 pm
Location: Taree Australia

v8

Post by rockrover »

the only prob with thew divorced trans is you may not hav the space in a swb as i hav found the area aint too big im thinkin of using a commo v6 or a v8 but using the same box as the mk as i hav heard they will handle the power but thats only wat i hav read no proof or experience
Chees Bourkey
rn106r 100watt hid lightforce 30 inch light bar 1 ton tipper and more to come
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Geoff Dellow does a kit for a 351 or 301 into an MQ/MK.

However I noticed there's one on ebay at the moment, not for a ford motor but for a holden one. It includes the adaptor bellhousing AND the gearbox. Do a search, it was cheap, might be worth a look instead unless you already actually have the ford motor.

Edit: here it is, I had it in my "My Ebay" watch list:

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 4634251480&

KR160 is an MQ four-speed isn't it?

Jason
This is not legal advice.
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

I found the Dellow kit very good.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 75
Joined: Sat Jan 21, 2006 9:52 pm
Location: Brisbane QLD

Post by mk swb »

i've put a 350 chev into my mk swb got the kit off dellows was excellent straight forward. and only cost $1000 delivered to my front door. and i got every thing except pressure plate!!!!!! I highly recommend them and would use them again if i done another!!!!!

Cheers Rees
20" chrom rim $3000 stainles exhast $1000 monsta tac $500 thinkn it make a lancer fuly sik priceles
Top
Posts: 91
Joined: Sat Aug 13, 2005 2:44 pm
Location: Perth Australia

Contact:
Contact demo2

Post by demo2 »

Ive done the clevo conversion on my mk, yell if u need any advise
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 160 guests