Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel shutdown

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Diesel shutdown

Post by fnqcairns »

My TD4.2 starts at the touch of the key everytime and when I shut it down it shakes the car - pretty rough too! Is this rough shutdown shake around typical?

Cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

yeh pretty much

but just to be sure check ur engine mounts
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

Thanks Hoonz, this car also has the diesel grrr really bad at low revs in gear, worst I ever heard and from what I have read the mounts can have at least a bit to do with that also. Will check them out.

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

my bros patrol and my wagon have the low idle grumbles too
i think its normal boost the idle up slightly

my ute idles at 1000rpm ehehehe
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

,,

Post by JemmyBubbles »

Mine does this as well. But it wont do it every time..

I am certain it is engine mounts..
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

my 4.2 started to do that shake when of/overrun thing but no seemed to say it was an issue..........
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

yeh i beleve its called run-on

and a good tune can fix this ( did for my car)
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

So what causes run on in these engines? It could be a bit of that.
I am itching to learn how to do a basic backyard tune to a diesel, this car will be going bush fairly often in remote areas I would feel better if I knew a bit more. Taught myself to tune a petrol engine. Even basic hands on information is hard to come by on diesel pumps, anyone got any experience in these basics?

My mounts seem to be intact still but they could work harden and transmit vibration I guess :? .

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Posts: 42
Joined: Wed Apr 20, 2005 9:21 pm

Post by nalucas »

If the motor seems to run on for a very short period and shut down a bit roughly, it can be the fuel cut solenoid not seating correctly or straight away. It's basically what causes these old motors to stop running, otherwise you have to choke it or somehow stop the fuel supply.

The solenoid is located at the back end of the pump, i think it's the only wire attached to them.

Worth a check anyway.

Mine does this every now and then, even though the pump was rebuilt 18 months ago. Don't really see it as a major concern.
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

Post by GU BUG »

My GU (4.2 turbo diesel) runs a little rough in the morning & when I shut it down if it's cold it wants to run on too :?. I notice also it blows a considerable amount of diesel smoke aswell???? I was thinking injector pump (I put new injectors in recently) but I'm not too sure :armsup:....
More poke = More smoke!!!
Posts: 90
Joined: Fri Jan 28, 2005 3:10 pm

Post by Dodger »

The shut down shudder is normal. Over-run is not and is usually poor injector quality.
The low down grumble is also normal caused by the clutch springs and the thrust bearing system.
Most 4.2 Patrols do this and it is usually not a problem.
Mates one has 300grand on the clock and is still growling but going great. Mine with only 140grand on the clock growls but is going great.
Must be a Nissan thing......
Gotta Getaway
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

The down side of the shake is it is destroying your body, door latches, seat mounts etc
J Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

Thanks for the replies, after reading them, all does seem to be within a normal range, I am happy for the grumble to be clutch springs. Will see to that when the time comes to pull the gearbox.

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Posts: 146
Joined: Sun Jul 13, 2003 3:01 pm

Post by marko »

:) AS soon as you put a new clutch in the grumble will go away.But in 6months time it will be back. I dont think the run on is a problem. Most old nissan diesel do that. Cant see it hurting the engine
Post Reply

Who is online

Users browsing this forum: No registered users and 116 guests