was thinking of doing the conversion to an injected twin cam gti head and i'm not sure what is needed to do it (apart from a suzisport right angle drive).
Any help would be appreciated..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
injected gti head
I'm assuming that you already have a 1300 block?, if so then you will need the GTi's head bolts set, timing gears inlet and exahust manafold, change the GTi's water outlet setup as there's is at the back of the cylnder head, also there is another way to setup the dizzy without the right angle drive needed, another frend set this up on his suzuki with a combination of toyota and suzuki dizzy parts, talk to rod at one stop suzi shop at nerang about this dizzy conversion sure he could help you out.
One Stop Suzi Shop Nerang QLD
(07) 5596 3844
One Stop Suzi Shop Nerang QLD
(07) 5596 3844
Trying to finish the Zook
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Who is online
Users browsing this forum: No registered users and 3 guests