General Tech Talk
Moderators: toaddog , TWISTY , V8Patrol , Moderators
Posts: 96 Joined: Mon Apr 12, 2004 7:12 pm
Location: Pakistan
Post
by ehsankiani Fri Apr 28, 2006 8:54 am
Nice..
..
You do not have the required permissions to view the files attached to this post.
Posts: 6221 Joined: Tue May 31, 2005 12:51 pm
Location: Sydney
Post
by v840 Fri Apr 28, 2006 9:14 am
No Mask
|^^^^^^^^^^^^^^| ||
Posts: 2775 Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne
Post
by GQ Bear Fri Apr 28, 2006 9:17 am
Now all you need is a couple of welding shields, gloves, boots and leather aprons
Keep up the good work!
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo Fri Apr 28, 2006 9:24 am
Looks like oxy/acet welding? I don't think that emits UV like stick/MIG does but still... you'd be seeing spots for a while
Posts: 3385 Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne
Post
by shakes Fri Apr 28, 2006 10:25 am
even oxy welding its damn hard to see the pool without goggles
and after about 5 secs your straining your eyes pretty bad
Simon
Posts: 4426 Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast
Post
by bru21 Fri Apr 28, 2006 2:05 pm
i have seen fellas welding with arc using cut up strips of 44 gallon drum for rods! making all those curios etc in zim
ADHD Racing would like to thankMrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 736 Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane
Post
by chops Fri Apr 28, 2006 7:34 pm
my knees hurt just looking at those guys sitting there welding like that
1988 351W GQ wagon
Posts: 1578 Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country
Post
by sudso Fri Apr 28, 2006 7:40 pm
Damo wrote: Looks like oxy/acet welding? I don't think that emits UV like stick/MIG does but still... you'd be seeing spots for a while
Checkout how the spatter is captured in the pic.
Now enlarge the pic and check out the cigarette lighters just next to them on the floor
Bordertrek 4X4 & Fabrication
Posts: 5714 Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.
Post
by nicbeer Fri Apr 28, 2006 7:44 pm
Two hoses going up to handset. wouldnt that mean oxy?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
Posts: 2809 Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria
Post
by Ruffy Fri Apr 28, 2006 7:46 pm
I reckon they're both oxy. Look at the hoses.
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo Fri Apr 28, 2006 8:35 pm
bru21 wrote: i have seen fellas welding with arc using cut up strips of 44 gallon drum for rods! making all those curios etc in zim
And I thought using old wire coathangers was agricultural
Posts: 2429 Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW
Post
by Ice Sat Apr 29, 2006 10:56 am
early days of arc welding had asbestos wrapped rods pretty hard to find now
xxxx wrote:
Posts: 1453 Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria
Post
by wrksux Sat Apr 29, 2006 12:20 pm
Ice wrote: early days of arc welding had asbestos wrapped rods pretty hard to find now
cant imagine why you would want to find let alone use asbestos now days
Posts: 654 Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton
Post
by CHOPZUKI Sat Apr 29, 2006 12:21 pm
Ruffy wrote: I reckon they're both oxy. Look at the hoses.
was just thinking the same thing
DRIVE IT!!!!!
Posts: 276 Joined: Sat Jul 16, 2005 1:41 pm
Location: Melton, VIC
Post
by eighty8 Sat Apr 29, 2006 6:46 pm
The Fred Hollows Foundation will always be busy with people like these two
..
[url=http://www.patrol4x4.com/forum/showthread.php?t=27334]The Weekend Warrior[/url]
Posts: 2429 Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW
Post
by Ice Sat Apr 29, 2006 8:06 pm
wrksux wrote: Ice wrote: early days of arc welding had asbestos wrapped rods pretty hard to find now
cant imagine why you would want to find let alone use asbestos now days
ive seen some... wouldn't be game to touch them though...
xxxx wrote:
Users browsing this forum: No registered users and 21 guests
..
Keep up the good work!
and after about 5 secs your straining your eyes pretty bad 
was just thinking the same thing
..