Help - Hazards not working on GU Patrol

[JontyG]

Hi,

I just noticed my hazards/flashers are not working. I'm thinking it may have something to do with a towbar I had fitted recently.

I have checked all the fuses, which seem to be ok. The indicators work fine. It's just the hazards which aren't working...

any help would be appreciated.

Thanks,
Jonty

[mickyd555]

i have the same problem and i have heard the solution to it, but i havnt checked if it works yet.

the hazard lights have a fuse ( i think this one is under the bonnet, not in the cabin fuse panel where the indicator fuse is) that is rated at the current draw of the stock indicators, as soon as you add any you could have a problem.

[JontyG]

aaah, ok, that could well be it then, given I have additional indicators on bull bar and in the main light cluster in the rear. I'll have a look under the bonnet when i get a chance.

Thanks for the tip!

[JontyG]

I replaced the 10A hazard light fuse (under bonnet) for a 15A fuse, and it works