Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Redline of 253

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Redline of 253

Post by Zeyphly »

I am curious to know what the standard redline of a 253 out of a VB commodore.
Thanks in advance
Last edited by Zeyphly on Sun Apr 30, 2006 7:32 pm, edited 1 time in total.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Maybe 5 1/2 to 6000...
www.bolsys.com.au
Top
Posts: 28
Joined: Tue Dec 14, 2004 7:27 pm
Location: NNSW

Post by Pissboy »

Would u not be be more concernd with max torque for wheelin
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Till the valves float or it cams out, you should be able to feel when there is no point reving it any more
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

it is still running the standard toyota tacho so when your cruisin down the highway reading 5,000rpm it's only doing 2500. So im not really going to get anywhere near 5 or since since it has plenty of balls below that.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

253

Post by chevJ40 »

i had a 253 in a monaro with shit loads of work done went to 7200 rpm went to 95kms in 1st with a trimatic before it valve bounced thats with points too people used to be amazed until it wore off a cam lobe now it has a chev instead
Top
Posts: 28
Joined: Tue Dec 14, 2004 7:27 pm
Location: NNSW

Post by Pissboy »

Put it in a commodore and it should go very nice down the highway...
Top
Posts: 28
Joined: Tue Dec 14, 2004 7:27 pm
Location: NNSW

Post by Pissboy »

Put it in a commodore and it should go very nice down the highway...
Top
Posts: 56
Joined: Thu Mar 16, 2006 8:14 am
Location: Bribie Island

253 rev limit

Post by bribiesurf »

they seem to be able to sit on 5500 all day long, but I know that a stock 253 bottom end in good condition can handle 7500rpm for ages, we used to put all the l34 cam, lifters, springs and manifold on stock bottom ends, they went like a cut cat, only had one let go after about 4 hours between 5500 and 7800, basically lifted the enge off a piston then threw the top ring, a lot of smoke but could still run enough to get home, cheapest motor for fun made, most of them you buy nowdays are just worn cams and stuck EGR, so new cam etc, 4 barrell rochester, yeha :twisted:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Zeyphly wrote:it is still running the standard toyota tacho so when your cruisin down the highway reading 5,000rpm it's only doing 2500. So im not really going to get anywhere near 5 or since since it has plenty of balls below that.
get a cheap tacho off ebay, mount it on the dash for correct reading
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

bogged wrote:
Zeyphly wrote:it is still running the standard toyota tacho so when your cruisin down the highway reading 5,000rpm it's only doing 2500. So im not really going to get anywhere near 5 or since since it has plenty of balls below that.
get a cheap tacho off ebay, mount it on the dash for correct reading
Yep, you need a tacho that will 'read' a V8 instead of a 4 cylinder ;)
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

Shorty40 wrote:
bogged wrote:
Zeyphly wrote:it is still running the standard toyota tacho so when your cruisin down the highway reading 5,000rpm it's only doing 2500. So im not really going to get anywhere near 5 or since since it has plenty of balls below that.
get a cheap tacho off ebay, mount it on the dash for correct reading
Yep, you need a tacho that will 'read' a V8 instead of a 4 cylinder ;)
There used to be a guy around Brisbane who specialised in recalibrating electronic speedo's & tacho's.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 8 guests