Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tb42 iar intake

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

tb42 iar intake

Post by mudmav »

hey guys i have removed my precleaner and have run some 3 inch tube for my intake its real dodgy though as the tube does not connect to my snorkle well at all. Any help with a better solution i tried search but not much their. I have heard rumours about a v6 commodore air box conversion but would need to see pics or a good explantion. Any help appreciated
.
andrewholmes
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

me too :D
Gq ute new built
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Why did you remove the pre-cleaner?
This is not legal advice.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: tb42 iar intake

Post by bogged »

mudmav wrote:hey guys i have removed my precleaner and have run some 3 inch tube for my intake its real dodgy though as the tube does not connect to my snorkle well at all. Any help with a better solution i tried search but not much their. I have heard rumours about a v6 commodore air box conversion but would need to see pics or a good explantion. Any help appreciated
.
I had a bracket made up for where the snorkel goes thru the guard.
its just the bracket thats there, with another piece of pipe welded to it, so I could hoseclamp the pipe from there to the airbox on.
Top
Posts: 129
Joined: Fri Jun 04, 2004 4:26 am
Location: Albury, NSW Australia

Post by Team Carpet RC Vehicles »

I am just about to embark on this project myself but on a SD33T Mk 1986
I am having a 3" stainless snorkel bent up and have a VR commodore box to replace the "large pizza" one on top so I have room for my intercooler. I am slightly behind because my Starter motor just died and about $500 maybe be lost repairing it.. When I get back to it I will post all my pics and details for ya...

You can get these silicone/neoprene (or something) on ebay that the turbo cars use.. They are blue in color but are all sizes with 45 + 90 degree bends in them also from 2' to 3' adaptors and so on.. Sorry I can't help more mate. I will post up as soon as I get some $$$ back.. Good luck.
VR Commodore box $45. Commodore hoses x 6 $17
Silicone hose
http://cgi.ebay.com.au/SILICONE-HOSE-2- ... dZViewItem
http://cgi.ebay.com.au/3-4-Ply-Silicone ... dZViewItem
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 127 guests