Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rangie Sills

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Rangie Sills

Post by Carl Coight »

Hey guys, just wondering if door sill replacement has been discussed here yet?
I've already replaced 1 with 3mm RHS :twisted: and am half way through the second.
Before anyone says it , i've looked in serch! :finger:
Carl
Live fast, die young and have a bloody good looking corpse.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I have replaced mine in a 2dr , had them made by a local steel merchant to my designs in gal sheet, made in 2 pieces - an inner flat section and outer L section. Cost was $15 for the pair !
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Post by Carl Coight »

Loanrangie wrote:I have replaced mine in a 2dr , had them made by a local steel merchant to my designs in gal sheet, made in 2 pieces - an inner flat section and outer L section. Cost was $15 for the pair !
Thats the go!
When i finally got around to pulling mine out i found they had been filled with news paper and bog!
Nearly done now so i will post up the pics tonight.
At least the doors will open and close properly. :)
Carl
Live fast, die young and have a bloody good looking corpse.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Before i left school i did a short stint at a panel beaters o ver the xmas period and we had this XC falcon wagon come in that had been hit in the rear. When we went to strip it for repair, we found that the entire rear 1/4 panel was made of chicken wire and bog from the rear of the door to the tail light ! i filled my new sills with expanding foam once repaired.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Post by Carl Coight »

I can't get pics to work :bad-words: It say the attachment is not allowed.
Live fast, die young and have a bloody good looking corpse.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests