Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pro's and con's for diff conversion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

pro's and con's for diff conversion

Post by zookjedi »

after sitting my car on its side this weekend im contemplating which diffs to put under my n/t swb sierra. reasons for change mainly for extra width
main choices are wt swb sierra or hilux/bundera diffs (which also will give me extra strength).
i know hilux pumkins are bigger therefore less clearance but i'll be able to go big rubber without worring about breaking stuff and heaps of gearsets to choose from.
i know it sounds like my mind is made up but am after genuine thoughts
like i dont care about keeping it one brand im a Scanas and am loyal to no brand :D except Honda but were not discussing bikes.
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

if u plan to go bigger then 33's id say go the toys
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

if you don't want to have it engineered, go wide track and call it good. hilux diffs are a fair bit wider and will make you cop magnet.

perhaps get offset rims and spacers and only use them off road if width is your main concern.

suzuki diffs on 33" will give you heaps of clearance already. hilux with >35" tyres will require a host of other mods as well.
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

Hilux all the way.

33's on zook gear and you will break cv's and rear axles.

35's on hilux diffs and it will be reliable as you can get and they will fit with minimal mods.

Worried about clearance, run bigger tyres (which you can and still be reliable) or shave the housing. I did my front diff and gained an extra 30mm of clearance.
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

tyre size's im thinking of running will be 33-35
im just a bit concerned about running anything bigger than 31's on zook axles and cv's , i like the rocks and don't do much in the mud .
but i spose i could try the wt with heavily offset rims and keep the 31's and see how that all fairs , i just want reliability as well as extra width .

anyone know how much grimbo's wt diffs have improved his rig?
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

stressed wrote:tyre size's im thinking of running will be 33-35
im just a bit concerned about running anything bigger than 31's on zook axles and cv's , i like the rocks and don't do much in the mud .
but i spose i could try the wt with heavily offset rims and keep the 31's and see how that all fairs , i just want reliability as well as extra width .

anyone know how much grimbo's wt diffs have improved his rig?


if all you are after is extra width dont waste your time changing the diffs. Slap on a set of wheel spacers or offset the rims as wide as you can get them.
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

mickbj42 wrote:Hilux all the way.

33's on zook gear and you will break cv's and rear axles.

35's on hilux diffs and it will be reliable as you can get and they will fit with minimal mods.

Worried about clearance, run bigger tyres (which you can and still be reliable) or shave the housing. I did my front diff and gained an extra 30mm of clearance.


yeah thats what i was thinking (minuss the shaving hadn;t thought of that )
what would be involved in putting on 35's besides a bit of hacking and cutting ?
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

stressed wrote:
mickbj42 wrote:Hilux all the way.

33's on zook gear and you will break cv's and rear axles.

35's on hilux diffs and it will be reliable as you can get and they will fit with minimal mods.

Worried about clearance, run bigger tyres (which you can and still be reliable) or shave the housing. I did my front diff and gained an extra 30mm of clearance.


yeah thats what i was thinking (minuss the shaving hadn;t thought of that )
what would be involved in putting on 35's besides a bit of hacking and cutting ?


I have 37 boggers on my zook with no body lift and a spring over.

If you have a body lift in yours, and also depending on wheel travel, 35's will fit quite easily. The area you will have to cut, if you have to, will be in the firewall/footwell area.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I have only had the car out once with the wid tracks but the stability is noticable and wheel travel has improved. i have been running 34s on Sierra stuff for about 3 years now and haven't broken anything yet. But as you said you want to do mainly rocks so it may be different. in Vic conditions there is a lot more give in the terrain so things aren't as bound up. We do have a guy in the club running 36" swampers on locked diffs with a dual transfer case setup and he has only broken 2 cvs
Ransom note = demand + collage
Posts: 111
Joined: Mon Nov 11, 2002 1:30 pm
Location: Sydney

Post by Megaman »

I'm with grimbo,

Mainly cos I've got a set of wide tracks for sale

Buy mine. $600
Megaman
______________________________________
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

Megaman wrote:I'm with grimbo,

Mainly cos I've got a set of wide tracks for sale

Buy mine. $600


i'd be interested but theres someone else selling front and rear w/t's with brakes and everything for $500. only done about 90,000km's to with 4.11 ratio's :D can you improve on that !
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

make sure that the brakes are complete if you buy them....complete doesnt mean no brake shoes, one wheel cylinder and no brake line..

so yeh just check that first coz its a major PITA if that isnt the case
CAM
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

is this comin from a personal experience cam? :D :finger:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

NO COMMENT :x :x :x :rofl:
CAM
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

camskizook wrote:NO COMMENT :x :x :x :rofl:



:rofl: :finger: :finger: :finger: we've all been there at least once Cam.
:D :D :D :finger: :finger: :shock:
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 111
Joined: Mon Nov 11, 2002 1:30 pm
Location: Sydney

Post by Megaman »

Stressed.

Use your centres to give you the ratio you want. and these diffs are complete. Brakes, pads, hubs, steering arms, etc etc. Still $600
Megaman
______________________________________
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Go the toyota axles!
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

i think ill go the wt for a while and when they start to break i'll have no choice but to go toy axles. its all about $ at the moment .

carlton i will get there but for now i'm gunna go the cheapest option .
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

stressed wrote:i think ill go the wt for a while and when they start to break i'll have no choice but to go toy axles. its all about $ at the moment .

carlton i will get there but for now i'm gunna go the cheapest option .


cheapest optiion in the long run will be hilux axles.

you will save money on breakages and you will eventually go hilux diffs so money spent on a wisetrack conversion will be wasted.

The cheapest way to build a car is to build right the first time!
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

stressed wrote:i think ill go the wt for a while and when they start to break i'll have no choice but to go toy axles. its all about $ at the moment .

carlton i will get there but for now i'm gunna go the cheapest option .


i can sell you narrow hilux rear - full brakes, axles no centre for $75

i can piece a front together for $100 - no centre or cvs axles

can arrange the other bits if needed

also have 1 4.5 ratio diff $200 and know a bloke on here with another 4.5
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 111
Joined: Mon Nov 11, 2002 1:30 pm
Location: Sydney

Post by Megaman »

Stressed

do not go to the dark side.......

Zuk all the way!

Dude, hilux will save you in the long run if you are gonna run big rubber.
Megaman
______________________________________
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

mickbj42 wrote:The cheapest way to build a car is to build right the first time!


halelujah!

Taxi's back to Canberra from Berridale are gonna get expensive after a while! :D
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

Go hilux if u wanna run big stuff.....go the zook w/ts if u wanna run 31s or 32s.....or better still BUY a damn hilux! :rofl: :rofl: :rofl: :D
CAM
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

My diffs are still for sale $500 and they are COMPLETE!! They are currently on my zook which is a daily driver, so it definately has brake cylinders, and pads :)

Ket me know if you are interested
Posts: 12
Joined: Fri Dec 20, 2002 1:38 pm
Location: Menai

Hilux diffs

Post by zookin »

go the hilux diffs!!! they are much stronger, and you can get em really cheap. I picked up a whole hilux for $400.and I just did the conversion on my zook and it works briliantlly.also i found out that the hilux diff housing (without axles) are the same width as the zook w/t housings. the only differance is in the brake drum. and its only a little wider anyway.

My 2 cents worth.
TFZOOK
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

why aren't you people doing diff swaps living in victoria? :?

If you were, i reckon there'd be at least a dozen people more than happy to take your widetracks of you... :)
DMA Founding Member #1 - Now Retired
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Every expresion of interest I've had in my diffs has been from some tool who wants to give me $50 for the lot, or someone who knows what a bargain they are, and would buy them if they were local :?

Might move to Victoria :roll:
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

Gutless wrote:Every expresion of interest I've had in my diffs has been from some tool who wants to give me $50 for the lot, or someone who knows what a bargain they are, and would buy them if they were local :?

Might move to Victoria :roll:


i'd snap them up if i was able to put the $500 aside for parts. however i can't sit down from my current spending spree. ;)
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

skip where are you getting your yj springs from? or have you found a suitable equivalent?
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

I know of a setm of hilux diffs for $850 complete.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests