Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

flywheel torque settings / vitara

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 66
Joined: Mon Mar 20, 2006 9:15 am

flywheel torque settings / vitara

Post by 1Lzook »

just after the flywheel torgue settings on a g16a (16v inj)

and also pressure plate as well

thanks
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Post by SiKiD_01 »

i have changed my clutch a few times on my G16a carby vit motor.

i just did the bolts up bloody tight and as even as i could, with a lot of loc-tite. same with clutch as well as fly.

havent had any problems yet. and the reason why i do so much is because i give my vit too much when it doesnt have any reduction gearing, so the clutch just fries.
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Cmon guys, have a seach around before you post up stuff like this. I found this page after looking in the bible. It says 14-20 ft/lb for the pressure plate bolts & 58ft/lb for the flywheel bolts.
Top
Posts: 66
Joined: Mon Mar 20, 2006 9:15 am

Post by 1Lzook »

thanks mate
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests