2H turbo Types?

[2dead2h]

Hey all.
Im just about to pull the engine out of the 75 cruiser (tis just sitting on mounts with one bolt holding her steady. After inspection if its not to bad i plan to rebuild her and will put a turbo on it. Would like to know from anyone who has done it what turbo they used, and with/ withou intercoler. Especially if you didnt get a kit fitted in a shop. I will be a little short on the money post rebuild and plan to pull a DIY on the whole thing for $500 or under.
Cheers
2dead2h

[Shadow]

i think i have read that a turbo off a 300zx is well suited.

can be had from an importer for $300-$500

[2dead2h]

ok cheers shadow,
well im trying to pic up a real cheap garette today, so if its in good nic then im gona be wacking it on theold girl post rebuild.
If anyone has any tips on such an installation or wants to see a pic doco of the install up give us a yell and ill get the old kodak out when its time.
2dead2h

[dumbdunce]

i think i have read that a turbo off a 300zx is well suited.

can be had from an importer for $300-$500

it's a bit big for a 2H unless you want to intercool and make some really serious power - the 300ZX turbo is good for 130 - 180kW. look for something off an engine with similar or slightly higher power to what you intend to make. 2H at 8 - 10psi with a free flowing exhaust, no intercooler, will make around 100 - 120kW safely.

(but it is a good turbo - ball bearing, ceramic turbine, very easy to clock and near bulletproof as long as the EGT's are kept reasonable)

[2dead2h]

Well i ended up with a oil cooled garette m10 turbo, including pipes and manifold. Tis a shame im going to have to cut the extractors i have out off the old girl. If any one in perth has a standard exhast and wants extractor tell me and well work a swap out. i have a Hj75 with the 2h.

[mudpog]

im interested in doin the same thing on mine
how much was the turbo ,was it new or secondhand ,wheres a good place to start lookin 4 one??if i can DIY for under $1000 ill be stoked
if a turboed 2h can safly make 100/120kw does anyone know wat they make standard??

[2dead2h]

a quick search on the web will give you some dynos of what the 2h makes stock. I got the turbo pipes and custom manifold for $200 which is rediciously cheap but it is in need of a good service which will probably be another $400 so im told. In terms of overall price and easyness, i read a post that said 1 day to set up but i havent had a go at it yet so no idea tlk to dumbance as he diy his. For some reason my engine just will not fall of the spline and come out, and im sure i have absolutley every bolt out that holds it to the box. If anyone has anytips to getting her out, give me a yell.

[2dead2h]

cancel that order, got the engine out on the weekend and into the shead ready to break down, though i dont think the grass out back will every be the same again. Now i gota take it all apart and try see whats wrong with her and how much it will cost me.