Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
anyone running 3rds front arms
anyone running 3rds front arms
hey all, just wondering if any of you are running those 3rds hinged front control arms on ur patrols, and if so how much of a difference to travel and flex did they make?
I've been running 3rd's arm since start of last year. The only thing I noticed is that I pushed the arms into the chassis. To fix it I just welded some 5mm plate into the chassis to strengthen it and replaced the bearings in the knuckles with normal rubber radius arm bushes. I've had no problems since. It doesn't allow it to flex much more than nomal but it flexes a lot easier which keeps the vehicle more stable through rough stuff. They are massively stronger than standard and you have a choice of 3 or 4 degree castor correction. PM me if you have any more questions or you can call Fernando at 3rd's (the owner). His number is on his web site.
Steve
Steve
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Who is online
Users browsing this forum: No registered users and 1 guest