hey guys
Im looking at purchasing a 75mm body lift kit soon from another member,
from what iv read on the web about bodylifts is that you run into a few minor problems.
from what im aware, im getting, extended steering column, body blocks and bolts and also the gear shifters.
does anyone else know what i will need for certain and what sizes i will need? in terms of fuel lines and brake lines?
cheers David
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux bodylift 75mm
Moderators: toaddog, Elmo, DUDELUX
Re: hilux bodylift 75mm
I had a 75mm body lift on mine and to be honest i wouldn't recommend it, it puts alot of leverage on your body mounts.z|gen wrote:hey guys
Im looking at purchasing a 75mm body lift kit soon from another member,
from what iv read on the web about bodylifts is that you run into a few minor problems.
from what im aware, im getting, extended steering column, body blocks and bolts and also the gear shifters.
does anyone else know what i will need for certain and what sizes i will need? in terms of fuel lines and brake lines?
cheers David
But if you really want to, you will need to:
*Extend your steering with a spine extention
*Cut out or remove entirely the lower section of your radiator shroud.
*Gearstick will need to be reshaped so you dont bash your hand on the radio, you may even need to cut some of the floor out for the tranny shifter.
No mods were needed to brake lines or wiring however the clutch line did get rather tight with my 75mm lift. I would reccomend that you get a lengthened one.
Thats about all i can think of for now.
\m/
BL
3" on my old sr5 dual cab no problems lowered radiator custom shroud never had any problems
06 Dual Cab Hilux Loaded with ARB
80 Series With L98 6ltr 35's 4L80E Locked & Loaded
84 Extra Cab Hilux Build up fun car
96 Dual Cab Hilux build up Long range play car
www.trailtrack4x4.com
80 Series With L98 6ltr 35's 4L80E Locked & Loaded
84 Extra Cab Hilux Build up fun car
96 Dual Cab Hilux build up Long range play car
www.trailtrack4x4.com
Nah, just the shroud that goes around the fan, because the radiator is mounted to the body and the fan is mounted to the chassis via the engine the radiator will now be 75mm higher than the fan. So you need to cut out the bottom of the shroud or its going to make a god-awful rukus in the engine bay.z|gen wrote:sweet as,
iv also heard that you need to modify the radiator mounting brackets?
\m/
Who is online
Users browsing this forum: No registered users and 99 guests