Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch issues

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

clutch issues

Post by macklux83 »

hni all, i have just finished replacing the clutch in my LN65 hilux,everything is back together but i dont think that i am bleeding the clutch properly. i have got a bit more pressure on the pedal but still not enough to get a gear,if i put it flat i can just get it into reverse with a bit of a grind. if i start the car in gear with the clutch in i can move it that way and it stalls if you try and start her in gear so im hoping that it is just the slave cylinder acting uyp and not anything inside the box.
any suggestions?
cheers :cool:
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

Hi, i have a 2.8 diesel hilux and jst replaced the clutch after putting a turbo on... I had the same problem as you, what it is, is that the slave cylinder iis not actually pushing the clutch far enough..
There is an adjustment on the bottom side of the clutch pedal, you have to undo a r clip, remove the pin for the pedal and adjust the screw out from the pedal, so that the clutch is pushed further in...

i moved mine bout 3-4mm, but you gotta try it and see if its enough..

Hope it helps

brad :armsup:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests