Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steel supplies - Blacktown or North Sydney

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Steel supplies - Blacktown or North Sydney

Post by beretta »

Hi I'm reasonably new to Sydney, can anyone point me in the direction of a good place to get tube for a rear bar and flat gal panel (for 1/4 chop), somewhere close to either Blacktown or North Sydney areas would be good. Name and phone number would be great if you have it otherwise just a name and I'll search for the rest!

Thanks for the help people!

Cheers, Paul
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Hi Paul, Edcon Steel (9905 5477) in brookvale are pretty good. Can cut it to size for you as well.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

v840 wrote:Hi Paul, Edcon Steel (9905 5477) in brookvale are pretty good. Can cut it to size for you as well.
There is also an Edcon in Blacktown area. Just have a google and you'll find their main site with all the info.
Navigator for Amelia in the 2007 stroller pushing championships !!
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Cool, actually I found edcon on google just now, wicked, thanks for the help gents!
Top
Posts: 16
Joined: Thu Apr 15, 2004 6:24 pm

Post by sxy759 »

also buttsworth engineering walker street in windsor 0245776866 very good and pretty cheap will cut as well.
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

yeah edcon are pretty good at blacktown, also there is a mob on bessemer st in blacktown, cant remeber the name thare are ok, both will cut as required
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 79
Joined: Thu Jun 16, 2005 10:54 am
Location: In Hell !!!!!!!!!!!!!

Post by stevelb1 »

Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Cheers.....Steve

Never argue with an idiot, as others listerning may not be able to tell the difference.
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Metalland silvewater - open Sat mornings too :D
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

SOuthern Steel, they have a couple of branches, i know of Milperra and Penrith, they are open Sat mornings, they cut to length, and stock alot of steel,
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

Tiny wrote: also there is a mob on bessemer st in blacktown
E-Z metal. ;)
\m/
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

Gribble wrote:
Tiny wrote: also there is a mob on bessemer st in blacktown
E-Z metal. ;)
its EZi Metal :finger: on the corner of bessemer and chicago.
Yurich Design Services
www.yds.net.au
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

stevelb1 wrote:Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Is this the sort of place where you can buy offcuts. We have a place in wagga that you walk around collecting your bits and piececs and then pay SFA . perfect for plate steel etc.


Cheers
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

pongo wrote:
stevelb1 wrote:Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Is this the sort of place where you can buy offcuts. We have a place in wagga that you walk around collecting your bits and piececs and then pay SFA . perfect for plate steel etc.


Cheers
i went in chasing off cuts and they sent me to the new steel warehouse, they sell full lengths/sheets, and the is a possibility they will cut it for you, i get my tube there when im buyin full lenghts but i prefer to use Southern steel at penrith,
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests