Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35" tyres on a GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
4by
Posts: 122
Joined: Mon Mar 31, 2003 9:30 am
Location: Victoria

35" tyres on a GU

Post by 4by »

Hi all,

Does anybody know if 35 x 12.5 x 15 tyres fitted to a GU wagon with lanscruiser rims stick out past the guards edge.

Thanks is advance.
Cheers.......4by.
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Re: 35" tyres on a GU

Post by morkz »

4by wrote:Hi all,

Does anybody know if 35 x 12.5 x 15 tyres fitted to a GU wagon with lanscruiser rims stick out past the guards edge.

Thanks is advance.
they should fit the brake calipers arent the larger ones on the diesel but someone that i work with says they come awfully close.

You may get a rock stuck between the caliper and rim and could do some damage but bolt one on and see how you go.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

Post by thunder »

yes they go outside the guards..
easy too get a extension on them .I used 50mm
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

a bees pecker past the guards .
You do not have the required permissions to view the files attached to this post.
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
4by
Posts: 122
Joined: Mon Mar 31, 2003 9:30 am
Location: Victoria

Post by 4by »

[quote="zookjedi"]a bees pecker past the guards .[/quote]

A bees pecker I can handle.

Just want to make sure to keep it reasonably legal.
Cheers.......4by.
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?

So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
Top
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

Offsets

Post by ROCKRASH »

Bogged, can't help much but can tell you that 16x8 51 series pro comp rockcrawler steels are series three GU offset + 17mm. I run 5 inches of lift in a series three with 285/75. Tyres still belt rear inner guards.
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

bogged wrote:
GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?

So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
i ordered the toyota rims so 20mm offset would be them , and they rub a little less with 35's and 3" lift fully tucked than what my 285/75/16 on stock gu rims do , so i reakon the yota offset all the way , if i was running 33"s on the toy rims i doubt they would touch at all by far .

cheers Jai
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

zookjedi wrote:
bogged wrote:
GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?

So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
i ordered the toyota rims so 20mm offset would be them , and they rub a little less with 35's and 3" lift fully tucked than what my 285/75/16 on stock gu rims do , so i reakon the yota offset all the way , if i was running 33"s on the toy rims i doubt they would touch at all by far .

cheers Jai
so anything from 17mm to 20mm! kewl...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 9 guests