Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Radiator size

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 91
Joined: Sat Aug 13, 2005 2:44 pm
Location: Perth Australia

Contact:
Contact demo2

Radiator size

Post by demo2 »

I've noticed that the p40 engined patrols have a bigger inlet and outlet than the L28 ones. I used my original rad and stepped it up midway in the hoses to suit the V8. Had i of known the p40 rad has same size as the V8 outlet etc i woulda used one. Does it have same amount of cores or more?
Top
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

Post by Heathx4 »

So do the diesel MQ's. Same radiator otherwise, I believe, just the inlet and outlet pipes are bigger. My diesel radiator in perfect condition was stolen, so I had to reuse my L28 radiator for the V8. I cut a 40mm long section of L28 hose and slipped it over the end. Then I just pushed the diesel hoses over that and clamped them tight. Was a nice fit.
* Nothing is foolproof to a sufficiently talented fool *
Top
Posts: 91
Joined: Sat Aug 13, 2005 2:44 pm
Location: Perth Australia

Contact:
Contact demo2

Post by demo2 »

Stolen rad1 jeez what is the world comin to when a rad gets nicked. Woulda fort a deisal rad would have more cooling fins but obviously not.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest