Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
any help would be appreciated. how do you remove the rear 2 bolts the attach the boy to the chasis. these bolts are on the extremeties of the rear corner.
ta
pidoca
1988 feroza, 3 inch suspension lift and 2 inch body lift
Im pretty sure the Feroza is the same as the Rocky, the bolts go up from underneath, the same as the pair at the front. You have to hope the thread is not corroded. You cannot get to the welded nut on a Rocky, without cutting panel.
The nuts and bolts are M10's with a 1.5 pitch , get your self another nut and TIGHTEN it against the orig nut ( rear bolt ) they should lock together , then undo , haypresto the whole bolt and nuts come out , oh yer WD40 the night before
Andy...........
All post's are submitted with the assistance of alcohol