Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3rds

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

3rds

Post by plowy »

Who is running the 3rds front control arms either on the 80 or 100 series

and has any one done a control arm flip with them /can it be done ?

and what is the cars on and off road like to drive with them

cheers plowy
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

Who is running the 3rds front control arms either on the 80 or 100 series

and has any one done a control arm flip with them /can it be done ?
I suspect nobody is running this mod, mainly due to 3rds not having released the drop arms to suit the 80/100 yet! I will be fitting the prototype set next week to the BBM 80, so keep your eyes on this thread to hear all about how it goes.

Rick.
rick@offroadmediagroup.com.au
Top
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

Give Dale a call at 2Dextreme. He makes front arms for 80 series. I would rate his higher than 3rds anyday of the week.

His number is 0407837074
L.S Canvas & P.V.C
www.lscanvas.com.au
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

I would rate his higher than 3rds anyday of the week.
Any particular reason why, or have you arrived at this conclusion cos you know the guy? Considering 3rds aren't even available yet, I fail to see how you could have even formed an opinion, let alone an informed one....
rick@offroadmediagroup.com.au
Top
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

BBM Rick wrote:
I would rate his higher than 3rds anyday of the week.
Any particular reason why, or have you arrived at this conclusion cos you know the guy? Considering 3rds aren't even available yet, I fail to see how you could have even formed an opinion, let alone an informed one....
you said it yourself....3rds arent even available yet.

but apart from that there a few comp drivers who run Dales arms, and they would not look at going back to 3rds.
L.S Canvas & P.V.C
www.lscanvas.com.au
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

and they would not look at going back to 3rds.
you said it yourself....3rds arent even available yet.
Isnt this a contridiction? How can you go back to something that hasnt been made yet? :?
rick@offroadmediagroup.com.au
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

thanks guys
Top
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Contact:
Contact sniper

Post by sniper »

this will be interesting to see how they work. Every bloody pootrol i see is using 3RDS arms, and i have been hearing for a while about them coming out on cruisers soon.
Cant wait till hear the reports on them.......sitting by my pc in anticipation :P
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

a mate has them on his pootrol and loves them but a fault we did pick up was that ,
were they mount to the chassi ,from that to the first pivot point it actually moves and allows the axle to move forward and back a little
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests