Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
low to high pinion locker HELP
Moderators: toaddog, Elmo, DUDELUX
low to high pinion locker HELP
just wanted to know if a 85 hilux centre with a ARB airlocker fit into a high pinion bundera centre any help would be great
It will go straight in only the inner steel air tubing will need to be reshaped and should be long enough. Going the other way hi-low pinion the steel air tube needs to be replaced. You will need a new compression olive for the steel tube when you make it the rite lenght.
Wally
( PS have done this a few times before )
Wally
( PS have done this a few times before )
Last edited by 80UTE on Sun May 14, 2006 10:06 am, edited 1 time in total.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Justin, apart from the airlines you might have to changed the hemisphere bearings depending on what locker your using RD01 or RD23. Either way it should be do-able. Also note that ARB have changed how the copper tube fits into the bulkhead fitting, it now uses an O ring instead of compression fitting and the tube size is 1/8 instead of 3/16.
John.
John.
Who is online
Users browsing this forum: No registered users and 75 guests