Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engineering my zuk?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

engineering my zuk?

Post by mr green »

can someone explain to me the broad contrast of vehicles that i see that have been engineered, ive see everything from full hydro susp/steer to some piece of pooka that looks like it has been fassioned up in the garden shed all bragging FULLY ENGINEERED. so i am thinking i will only have to give an engineer o phone call and he'll post me one in the mail. :D (wellnot realy) ;) i have a 91 swb soft top , ute conversion, sub tank, coil rear, sprung over front,little 31''s and a gti eng. all welding was done by a professional & i'm a quallified mechanic so it is strong and reliable.
but when it was my turn ta talk to an engineer , my little 31''s on 8''s were too big suspension needs to be x-rayed and it cant be more than 50mm taller than standard :x :2gunfire: 50mm,50mm, iwouldn't be talking to engineer if it was less than 50mm
does any one have any help or similar experiences?
or if you have a decent engineer and you dont want to tell the world you can pm me, ;)
any help appreciated, jase
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 583
Joined: Sat Sep 24, 2005 7:38 pm
Location: Central West-NSW

Post by Vineboy »

There is an engineer in Dubbo who was very helpful to me over the phone when I did my GTi conversion on my last ute, so PM me if you want some details.
Cheers,
Andrew
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

thanks vineboy, have talked to him briefly but i think it might be a bit more moded than what he wants. didn't say he wouldn't do it but i just can't imagine everybody dismantling thier truck to have stress tests and x-rays.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

mr green wrote:thanks vineboy, have talked to him briefly but i think it might be a bit more moded than what he wants. didn't say he wouldn't do it but i just can't imagine everybody dismantling thier truck to have stress tests and x-rays.
The best way to get things engineered is to speak to the engineer before you start anything. have your plans worked out and work with him to get what you both want. Trying to get anything retro approved is going to be very hard. Doesn't matter if you say you are a good welder/mechanic etc they need things done their way to ensure they will aprove it.

As you mentioned many things get approved but I reckon you'll find they havve gone through the appropriate procedures to get them done.
Ransom note = demand + collage
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests