Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

widening mq track

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 48
Joined: Sat Jan 15, 2005 10:49 am
Location: Melbourne..... Cranbourne

widening mq track

Post by takearidewifme »

curious to know whether I can use standard parts to widen MQ diffs. was thinking about 2 inch wider by cutting the housing ( either long or short side) and extending 2 inches then HOPEFULLY using a standard axle from another model that has the same spline that is the right length....
I KNOW THAT IT WOULD BE EASIER TO USE GU OR GQ BUT i CAN GET MQ FOR $90.00( sorry to yell)... Are my thoughts wasted of can it be done?

Mark
"YOURS MIGHT GO FAST, BUT MINE GOES ANYWHERE"

79 Range work in progress
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

I wouldnt go to all that hassel, just get wheel spaces or get your rims cut and fliped with custom offset. My wheel track is a tad over a GQ with my rims cut and fliped.
Top
Posts: 48
Joined: Sat Jan 15, 2005 10:49 am
Location: Melbourne..... Cranbourne

Post by takearidewifme »

yeah I did think of that but its the mounting and bumpstop locations that I wanted wider although they will be converted to 4 link.... How much narrower than a gq is the mq exactally?

Mark
"YOURS MIGHT GO FAST, BUT MINE GOES ANYWHERE"

79 Range work in progress
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Gq is about 2.5 inch wider on either side....

and y do that hassle to MQ diffs... they are not worth the time, if your going to do that much work, do it right and at least get some strength out of it by using stronger diffs.
there is a reason mq diffs are cheap.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests