G'day All,
I have just purchased a 1995 Series 1 V8 Auto Disco with 130,000 K on the clock. My first job is to get some decent rubber and suspension under it. I would like to run 33 inch Goodyear MTR's or Coopers STT. I am not a keen fan on exceptionally tall lift kits, and I dont like body lifts either. I also intend on getting an ARB winch bar and I would like long range tanks, as I know this will have to be taken into consideration when I make my decision. Does any body have any experience with Safari Gard products? Any advice is appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Series 1 Disco suspension options
Moderator: Micka
Hi we put 33s Muddies on S1 Disco Dave and had to do a fair amount of guard chop to get clearance, even though we lifted the body 2.5 inches and the suspension 2 inches. The tyres also hit on the control arms on full lock. Otherwise a piece of cake!
Nice gq swb ute chop with a huffer for the good times
If you want it to be road legal, I think you will need disc brakes (because the disco has discs).Reddo wrote:....portals - he would love to get them. Dad going to look at them in the UK, eg, portal boxes off MOG or Volvo, and fit locally........
Maxidrive are just toooooo expensive, worth 5x what the car cost originally!
So by the time you convert the volvo or mog portals to disc and all the rest, you would have been better off with the maxi-drive portals IMHO.
John
I have no personal experience with safari gard or discos, but from years on the forums (here and USA), the concensus seems to be that they are expensive and their service is unreliable (late with deliveries and ship incorrect parts etc).
Have you tried Les Richmond Automotive? I would be surprised if they don't have what you need. And they would be easier to deal with - I have only had good service and been please with their products.
Have you tried Les Richmond Automotive? I would be surprised if they don't have what you need. And they would be easier to deal with - I have only had good service and been please with their products.
John
Wooder's who is putting Mogs onto his Jeep was told by the engineer to leave the drums on there. If they stop a Mog, then they will stop his heep. The other issue was maintaining the track of the axle which the regulations permit only a minimal amount of.Bush65 wrote:If you want it to be road legal, I think you will need disc brakes (because the disco has discs).Reddo wrote:....portals - he would love to get them. Dad going to look at them in the UK, eg, portal boxes off MOG or Volvo, and fit locally........
Maxidrive are just toooooo expensive, worth 5x what the car cost originally!
So by the time you convert the volvo or mog portals to disc and all the rest, you would have been better off with the maxi-drive portals IMHO.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
yeh, lots to think about. Drums work OK by all accounts, but can be converted to discs without too much trouble and expense. Would be lots cheaper than Maxidrive, probably.
See what the bits and pieces cost in the UK and then decide. Engineering will be big trouble given the new laws. Apparently engineering is difficult near impossible in most States now, and those that have fitted portals allegedly just keep quiet and hope the law thinks its miltary or something special coming!
See what the bits and pieces cost in the UK and then decide. Engineering will be big trouble given the new laws. Apparently engineering is difficult near impossible in most States now, and those that have fitted portals allegedly just keep quiet and hope the law thinks its miltary or something special coming!
Nice gq swb ute chop with a huffer for the good times
Bush65 wrote:I
Have you tried Les Richmond Automotive? I would be surprised if they don't have what you need. And they would be easier to deal with - I have only had good service and been please with their products.
I rang Andrew last week after sending him an email about springs /sizes and rates ...
I called and spoke with him , found him aggressive and full on "He claimed to be passionate
but i wont deal with him now Rude Unhelpful Arrogant and never returned any emails
i have just ordered springs from andrew at LRA and found him to be helpfull and knowledgeable.
he didn't push all there products on me and gave advice on related problems due to fittting longer springs.
he may be a little bit conservitive compared to others but is trying to maintain a well handling road safe vehicle.
cheers, Serg
he didn't push all there products on me and gave advice on related problems due to fittting longer springs.
he may be a little bit conservitive compared to others but is trying to maintain a well handling road safe vehicle.
cheers, Serg
Funny you say that. Everyone keeps telling me how great the sevice is down there. Now I love there products and have dealt with them a few times but I have found the younger guy down there (I assume this is Andrew) to be very arrogant and unhelpfull but have dealt with an older guy there as well who is fantastic.oildripa wrote: I rang Andrew last week after sending him an email about springs /sizes and rates ...
I called and spoke with him , found him aggressive and full on "He claimed to be passionate
Rude Unhelpful Arrogant and never returned any emails
Thanks,
Adam
Adam
The amount of work these guys have put into Rovers is amazing, Serg is right, they are mainly concerned about a well handling road safe vehicle. as for arrogant, Andrew knows more about legally modifying Rovers than any of those other so called Rover experts.he didn't push all there products on me and gave advice on related problems due to fittting longer springs.
he may be a little bit conservitive compared to others but is trying to maintain a well handling road safe vehicle
Walker, there is about 8 people who work there, and Andrew isn't there as much, but he is the one to speak to, very helpful and full of good advice
yeah, but ....Reddo wrote:....portals - he would love to get them. Dad going to look at them in the UK, eg, portal boxes off MOG or Volvo, and fit locally........
Maxidrive are just toooooo expensive, worth 5x what the car cost originally!
if you get a cheapie disco or rangie (anything up to 10k max maybe) , few basic mods then the portals (i think 12k but havent checked yet, job for this week) then will have an awesome vehicle that should do everything. don't forget different
reading latest 4wd monthly with the portaled disco got me thinking about my next car. mmmmmm much to think about
A few real issue with most f the portals (esp the mogs):
1. Changing from drums to discs does change the diff track - and it's not a cheap mod........But it does save some weigtht as the Std Mog drums ain't light.
2. Width - I go no idea how wide a DLR is - but a TJ is 60" WMS-2-WMS....where as the mogs are 69" (without disc conersion which adds about andther 2")....Cutting an shorening is also an expensive exercise - of you need to be prepared for some pretty seious guards.
3. Pinion lnegth - probably not as much as an issue with the longer LR Wheel bas compared to the Jeep - but that pinion is bloody long,
4. Ratio. Start thinking 7.54 as a diff ratio.....That's either some bloody big tyres or big rpm or some clever gearing to get that to an acceptable range or you'll be screaming the tits of the engine at 100km/h.
1. Changing from drums to discs does change the diff track - and it's not a cheap mod........But it does save some weigtht as the Std Mog drums ain't light.
2. Width - I go no idea how wide a DLR is - but a TJ is 60" WMS-2-WMS....where as the mogs are 69" (without disc conersion which adds about andther 2")....Cutting an shorening is also an expensive exercise - of you need to be prepared for some pretty seious guards.
3. Pinion lnegth - probably not as much as an issue with the longer LR Wheel bas compared to the Jeep - but that pinion is bloody long,
4. Ratio. Start thinking 7.54 as a diff ratio.....That's either some bloody big tyres or big rpm or some clever gearing to get that to an acceptable range or you'll be screaming the tits of the engine at 100km/h.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Who is online
Users browsing this forum: No registered users and 0 guests