Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear drive shaft

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

rear drive shaft

Post by Locknut »

G'day fellas
i have put a slight dint and sort of shallow scrape marks on my drive shaft near the rear uni joint,would this cause any vibration while driving??
as im now getting a slight vibration and im looking for the........................ "what bloody now"

NH lwb Autocrap
Top
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

G'day, scrapes wont do a thing but a dent might be able to slightly put it out of balance. Have you checked the rear uni to see if its got any movement, thatll definately do it..
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

There are small weights tacked onto the drive shaft which are used to balance the shaft. Is it possible that you have knocked one of these off? If the vibration has occurred since you hit the drive shaft, then you would have to assume that it is related! I would remove the shaft and have it balanced!

Hope this helps

Gabe
Top
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

Id say for sure your tail shaft is out of balance due to the hit . If your lucky a balance will fix it , about $80.
Top
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

do you know if a manuel drive shaft will fit a auto?? as a mate has a manuel and i can just swap them over to see if that is the problem.
Gav
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

No it won't the auto drive shaft is shorter.
I just luv my "clacker Jabber"
Top
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

BUGGA
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests