Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What material are shafts made from

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

What material are shafts made from

Post by 4sum4 »

Wondering what is the material that tail shafts are made from?
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

STEEL
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 254
Joined: Sun Dec 18, 2005 10:44 pm
Location: adelaide

Post by numbnuts »

are we talking human or mechanical
GU 4.2TD
wagon.
looking for that perfect route?
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

My shaft feels like steel sometimes. :roll:
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Some late model Pajeros used a composite for the front tail shaft - and some have shattered when hit.

Scott
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

STUMPY wrote:STEEL
What type I`m after :roll: :D
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Perhaps you need to re-word your original question. This is Outer Limits afterall :D

What part of the car is the shaft for?
Most general industrial shafts are 4140
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

4sum4 wrote:
STUMPY wrote:STEEL
What type I`m after :roll: :D
LOL :D I've got a chopped up hilux one that i'll measure the ID and OD.

Is that what you are after?
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

the guy i get to do my tailshafts says the material is not so special, not like 4140 or anything. it is the dimensions that are hard to come by. some people use pressure pipe and bore the ends to size. some even use hydraulic tube.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

mines about 60mm outside bout 8mmm wall just normal mild steel
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Supercars use 2 1/2" (64mm) X .095" or 3" (76mm) X .083" Chrome/Moly 4130 tubing.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest