
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3Link panhard front
Moderators: toaddog, TWISTY, V8Patrol, Moderators
3Link panhard front
Wondering what peoples thoughts of 3 link panhard front,It will be on a Hilux front my worry is strength of the housing


[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
you might find it's a bit underconstrained and the on-road handling will be shite with unpredictable/unacceptable roll steer?
left hand drive? I see a draglink and panhard roughly parallel (good), but left side steering box?? is this just a pic you've borrowed off another site?
is that panhard bent?? why??
housing strength is a minor issue, it's not rocket science to truss it up.
left hand drive? I see a draglink and panhard roughly parallel (good), but left side steering box?? is this just a pic you've borrowed off another site?
is that panhard bent?? why??
housing strength is a minor issue, it's not rocket science to truss it up.
Free air locker to the first 20 callers!
I'd say its a pic from piratedumbdunce wrote:you might find it's a bit underconstrained and the on-road handling will be shite with unpredictable/unacceptable roll steer?
left hand drive? I see a draglink and panhard roughly parallel (good), but left side steering box?? is this just a pic you've borrowed off another site?
is that panhard bent?? why??
housing strength is a minor issue, it's not rocket science to truss it up.
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
www.jaybeecanvas.com
upper link is fine were its at-Scott- wrote:Excuse my ignorance, but shouldn't that link to the top of the diff be going to the roll-centre of the suspension - or somewhere near it?![]()
Or does that only apply to 4 links (no Panhard)?
Or am I just ignorant?![]()
Scott
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Who is online
Users browsing this forum: No registered users and 3 guests
