Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extractors

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

Extractors

Post by giffo »

Would extractors off a 3Y 1985 Hilux engine fit my 2.8 ltr diesel 4 Runner 1991?
I am interested in buying but dont know what fits
Thanks
Steve
Life is not a bowl full of Cherries!!
Posts: 33
Joined: Thu Aug 04, 2005 10:09 pm

Post by coffen »

no they won't fit 2 different size & positioned exhaust ports
regards coffen
Posts: 115
Joined: Tue Jan 03, 2006 8:32 pm
Location: stuck between the clowns & the jokers!

Post by MR04WD »

Hey Steve,these will fit yours mate,I have them for sale,PM or e-mail me if you're interested. ;)
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
(02) 94766137
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

Extractors 2.8 DX 4 Runner

Post by giffo »

I have read many a thread on Outerlimits over the past month or so.
After receiving replys to my bit on increasing power to my 1991 2.8 diesel 4 Runner (5 speed) it was decided that a turbo at this stage was to expensive.
Many said "Go for the extractors" So I am buying a set off a fellow member this week.
My questions are:
1. What size exhaust? 2" or whatever?? (all the way)
2. What type of muffler? (been told free flow system)
3. What increase in power will I achieve??
4. What else can I do?

I mentioned in my thread some weeks ago I was towing a 1.3 tonne boat and was worried about getting up hills. Well I did try and Yes, I made it up the bloody big hill, BUT SLOWLY.
Hopefully the extractors will help
Steve :roll: ;) :?:
Life is not a bowl full of Cherries!!
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Would it be possible to do something with the extractors on my 2L-T?
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

No point gotoy... extractors are for NA cars, they are just a free-er flowing exhaust manifold design... you could get a custom exhaust manifold to bolt your turbo onto, but its a bit out there for a 2L-T, what you want is a 3" dump pipe of the turbo, thats as close to extractors as you can theoretically get.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Re: Extractors 2.8 DX 4 Runner

Post by bastard »

giffo wrote:I have read many a thread on Outerlimits over the past month or so.
After receiving replys to my bit on increasing power to my 1991 2.8 diesel 4 Runner (5 speed) it was decided that a turbo at this stage was to expensive.
Many said "Go for the extractors" So I am buying a set off a fellow member this week.
My questions are:
1. What size exhaust? 2" or whatever?? (all the way)
2. What type of muffler? (been told free flow system)
3. What increase in power will I achieve??
4. What else can I do?

I mentioned in my thread some weeks ago I was towing a 1.3 tonne boat and was worried about getting up hills. Well I did try and Yes, I made it up the bloody big hill, BUT SLOWLY.
Hopefully the extractors will help
Steve :roll: ;) :?:
Did the extractors and the exhaust and the muffler noticed no differene at all except for a anoying exhaust note and 500 dollars less in my bank account.only lasted 2 weeks ripped it out and did the turbo conversion,best thing i ever did the manifold i bought from boss wrecking for 45 dollars all the cross over pipes and fittings came from mtq turbo at salsbury for 200 dollars the turbo i bought from asian imports for 100 dollars as it was smokey,Mike vine rebuilt the turbo for 650 dollars,a heater hose connection came strate of a surf to adapt the water cooling this cost 30 dollars.I pulled the sump off and welded on a piece of pipe to take the turbo oil return to the sump.Lewis hoses and seals made the oil feed line that screws straight into the side of the block and feeds the turbo the oil this only cost 75 dollars in braided stainless steel.Fitted a pyro and wound the pump up three flats,have a 3 inch exhaust system which half of it i made myself,i have 33 inch tyres and with that set up it has no trouble pulling away from mates 3 litre 1kz until around 105 kmp were the 1kz starts to pullaway,the 1kz only has 32 inch tyres.Ps i love to drink beer and smash shit up usually with explosives,my friends say i have a mental issue. :armsup:
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

Bastard

Post by giffo »

Thanks Bastard,

Oh is that all i have to do???????????
Well I better save my pennies and suck up to the wife.

Cheers
Steve
:P

I too smash things up and drink beer, But I usually put handcuffs on them after all that!!! ;)
Life is not a bowl full of Cherries!!
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Mate, get some lpg happening....you can inject it ontop of the diesel, and wow...like a turbo only less hastle.
Andrew
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

LPG

Post by giffo »

You are kidding yeah!!!
I never knew you could do that to diesels.
Would you know anywhere in Sydney that does it? AND
what type of money would I be looking at?
Steve
Life is not a bowl full of Cherries!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests