I know and have done the 100 series stud conversion on the rear of my 80 just wondering if anyone knows of any trick to strengthen the front ones up??
I have destroyed 3 hubs now and im starting to get sick of it...
i know theres not really enuf meat on them to put bigger studs in so im thinkin just put bigger dowels in??
ANy ideas anyone ???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Busting the end plates off the front of my 80's hubs
Moderators: toaddog, Elmo, DUDELUX
This is true and have done on many times my collet seat cutter was made compact enough so i could do front hubs as well. The hubs need to be in good condition as if they have been beaten around to much to get the collets out its not the best for modifing.On my 80ute i have 100 seies FWH's so i hade to change the hub studs P.C.D. from 90-92mm so the hubs are std but the others ive modded have had no problems at all.AlbyOne wrote:I have seen a few 10mm upgraded fronts – PM Wally [80Ute] and he may give you all the details you are after….
wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Who is online
Users browsing this forum: No registered users and 1 guest