Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8 engine help needed
Moderator: -Scott-
2.8 engine help needed
G'Day guys,
I have a question about the 2.8 diesel intercooled, this one actaully being in a DELICA.
I am going to struggle to explain what this piece of componentry is, but here goes!
It is a small valve that sits in a cast casing, and it has coolant run through it. It is down low on the passenger side of the engine, and has a lever with a big spring above it, and that lever sits against the plate that the throttle cable comes in on. This valve has a circlip holding it down into the cast casing, and it sits in the vertical position.
The problem my friend is having, is that this valve is leaking coolant. I know this is a very slap hazard description, but can someone tell me what this and if it is easy to replace?!?
Thanks a lot!
Cheers, Dan
I have a question about the 2.8 diesel intercooled, this one actaully being in a DELICA.
I am going to struggle to explain what this piece of componentry is, but here goes!
It is a small valve that sits in a cast casing, and it has coolant run through it. It is down low on the passenger side of the engine, and has a lever with a big spring above it, and that lever sits against the plate that the throttle cable comes in on. This valve has a circlip holding it down into the cast casing, and it sits in the vertical position.
The problem my friend is having, is that this valve is leaking coolant. I know this is a very slap hazard description, but can someone tell me what this and if it is easy to replace?!?
Thanks a lot!
Cheers, Dan
Yeah its a bit tricky, especially with a description like that!!
Thanks for your reply though, but I am not sure what this EGR you speak of is. But yes, it has coolant running to it, and it looks like that perhaps when the coolant reaches a certain temp, this valve may push up against this spring loaded lever, activating something.
Cheers, Dan
Thanks for your reply though, but I am not sure what this EGR you speak of is. But yes, it has coolant running to it, and it looks like that perhaps when the coolant reaches a certain temp, this valve may push up against this spring loaded lever, activating something.
Cheers, Dan
Kanis, thankyou, that sounds exactly what it is, down near the pump. Can get a pic during the week.kanis wrote:Hi Dan
I own a 1999 Deli.
For me it sound taht this part is next to dieselpump. I know there is a connection to the cooling system of the engine. This valve controls the dieselpump in relation of the enginetemperature. Anyway a pic would be very helpfull.
kanis
Cheers, Dan
Delica
Mitsubishi Delica
2.8 Turbo Diesel
Its big, black and bad!!
2.8 Turbo Diesel
Its big, black and bad!!
I've just had a look at mine dan,
no luck here either though, there's nothing like that on my 4m40. definately suggest trying the delica forum, it's probably Jap emission equipment, and those delica guys like finding ways around that stuff from what I've seen
Our 4m40s are missing a few things like that.
Rob
no luck here either though, there's nothing like that on my 4m40. definately suggest trying the delica forum, it's probably Jap emission equipment, and those delica guys like finding ways around that stuff from what I've seen
Our 4m40s are missing a few things like that.
Rob
96 Paj 2.8 TD 2" lift, Snorkel, LR Tank, Dual Batt, winch, 32 MTRs, RT tent and rack, polyairs etc
Who is online
Users browsing this forum: No registered users and 0 guests