Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gu patrol tail shaft

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

gu patrol tail shaft

Post by michael a »

my mate put a 4 inch lift in his patrol and the tail shaft rubs on the x member.

I know ou should turn it arround but there are different yokes on each end.

should we jst swap the unijoints around??

can someone thats done this before let me know

cheers
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

we always just turn them around and have never had a prob.
Mine has been running this way for ever.

If you can't/don't want to do this then your only option is to cut the cross member and plate it in. \___/ sort of like this
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

we always just turn them around and have never had a prob.
Mine has been running this way for ever.

If you can't/don't want to do this then your only option is to cut the cross member and plate it in. \___/ sort of like this
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests