Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

offset castor bushes...any good?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 276
Joined: Sat Jul 16, 2005 1:41 pm
Location: Melton, VIC

offset castor bushes...any good?

Post by eighty8 »

Do offset castor correction bushes hold up ok, or do they wear out pretty easily?.
Gotta replace my originals as they are gone and just wondering if it's worth getting the correction bushes or nissan bushes with correction plates to siut a 3in lift.

cheers...
[url=http://www.patrol4x4.com/forum/showthread.php?t=27334]The Weekend Warrior[/url]
Posts: 58
Joined: Fri Nov 11, 2005 3:46 pm
Location: GOLD COAST

Post by Stew77 »

no probs with mine as yet approx 20k's. just buy on quality not price & you should be ok. Got mine from Chris @ Performance suspension Brisbane rd, Labrador. Hope it helps
MN TRITON

VENTURI INDUSTRIES
GAS & ELECTRICAL COMPONENTS
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

Post by ROCKRASH »

runing c-c bushes in a 79 series ute and a GU wagon. The bushes work ok in the 79 but bind the GU's front up pretty bad. Probably an overkill with 3" of lift but if you are serious drop boxes or arms would be my choice. If you poke around on this site you'll find good info on this topic
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

they dont last long if your flexing alot
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

Whether they last I can't say after only 12 months but the car steers a lot better.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

I have castor bushes with 3" lift and if I were doing it over I would be factoring in the cost of castor correction plates instead. It's not so much the wear issue (I haven't had them long enough to say anything about that) - it's the fact that they are not a serious way of correcting castor.

Jason
This is not legal advice.
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

chimpboy wrote:I have castor bushes with 3" lift and if I were doing it over I would be factoring in the cost of castor correction plates instead. It's not so much the wear issue (I haven't had them long enough to say anything about that) - it's the fact that they are not a serious way of correcting castor.

Jason
A 3" lift isn't a serious lift either, I had 2" without them then went to 3" & needed them, if I was going for plates, mights as well go 4" or 5" lift :)
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

I have 3 sets at work sitting on the bench all different brands all around 12 months old and all totaly flogged out. :?
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 59
Joined: Mon Jan 02, 2006 9:45 am
Location: Redcliffe, QLD

Post by BigQQQie »

Have never had a problem with the OME ones. although do recommend plates for major castor correction, bushes will normally only correct about 2 degrees. anything over 2-3inchs plates defeneltely. How much castor do you have?????
91 GQ LWB
Td42, Safari Turbo,
4" OME lift, 33"Muddies
Snorkel, IPF'S, Dual Battery
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests