Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

baby seat in a 110 anyone?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

baby seat in a 110 anyone?

Post by andrew e »

Anyone got one? where are your fixture points? anyone got any pics? Just planning ahead for the expanding family.....



Andy
Posts: 14
Joined: Fri Aug 01, 2003 3:45 pm
Location: Adelaide

Post by Teddy »

Hi Andy,

I rung up the RAA and they gave me a list of approved Installers here in Adelaide that can install the mounting fixture. Mine mounted at the rear of the Vehicle above the left hand rear window. The strap comes off the car seat to the back of the truck. Cost me $110 and I had the buy an extension strap from Super Cheap I think it was.


Ian
Go Hard or Go Home
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

A mate of mine had an aproved babyseat fitted to his county. From memory (bit hazy) - he first had to get a bar mounted between the cappings, just behind the 2nd row seat. The baby capsule mounted to this and the seatbelt mounts and sat on top on the 2nd row seat.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 51
Joined: Wed Aug 31, 2005 1:53 pm
Location: Emu Plains, NSW, Australia

Post by p38arover »

Andrew, see here - bar for sale: http://www.aulro.com/afvb/showthread.php?t=27523 $40

Ron
1995 Range Rover 4.6 HSE
2005 Subaru Forester 2.5X
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i use a cargo barrier with approved cutouts fot the belts then down to the floor with a plated bolt
david
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests