castor plates

[plowy]

fitting a set of 100 series diffs to the 40

and im flipping the front control arms as well , i want to know if standard castor plates can be purchased ?

instead of cutting and cleaning up the old ones ,even tho they have to come off

i know you can buy from toyota the main chassi mounts

or is it only the 2-4deg castor plates that can be bought ?

yes i have used the search too
cheers plowy

[redzook]

fitting a set of 100 series diffs to the 40

and im flipping the front control arms as well , i want to know if standard castor plates can be purchased ?

instead of cutting and cleaning up the old ones ,even tho they have to come off

i know you can buy from toyota the main chassi mounts

or is it only the 2-4deg castor plates that can be bought ?

yes i have used the search too
cheers plowy

if your goin to the trouble of putting in 100 diffs why not ditch the radius arms? and 3 link it properly?

[plowy]

As well as flex and a comfortable ride
it was being set up as low wide and flexible and also as a capable tourer
i had not looked at a 3 link front end

how does a 3 link front end handle every day duties /touring /onroad life

[plowy]

anyone

[stool]

Should be fine as nissan runs a 3`Link set up from factory

I allways thought toyota did as well

[plowy]

Should be fine as nissan runs a 3`Link set up from factory

I allways thought toyota did as well

stool im not sure if redzook is on about the front or rear end

but the front is the same 2 control arms and a panhard rod

unless redzook is calling the control arms radius

[crankycruiser]

I bought flip plates for my 80 from Overkill..

He should be able to help ya...

Yes the cruisers and patrols do have 3 link front.. im not sure wat redzooks talkin bout

[plowy]

thank you cranky