Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
honing td42 liners?
honing td42 liners?
Are you able to hone the bore liners on td42 motors using a flexihone? the liners still have hone marks but as expected that area is under the most stress so has worn to nearly nothing. i just dont want to put new rings in on bores that aren't honed......
Honey i cut the car in half!
Woop are you missing a 0 ? hope so or my td will never be pushed past idle again 
cheers fnq
Josh any pics for those of us interested in seeing this type of stuff?The liners themselves are less than 1mm thick so you could probably hone them if they arent too worn. Nissan do sell oversize pistons, so you could probably do it.
cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
yeah i wouldn't mind posting up pictures to keep people informed but apparently i have to have a host site or something to put up a picture.....
i'm too technomologicaly challenged to do that.
But its a big work in progress this engine, converting my petrol to turbo diesel, lots of work ahead yet
i'm too technomologicaly challenged to do that.
But its a big work in progress this engine, converting my petrol to turbo diesel, lots of work ahead yet
Honey i cut the car in half!
Josh if you want to get a few picks up I can PM my email for you to send and I will post them.
Woop if you have the time some pics it would be good, I have read about your rebuild although the pics are long gone. If it is OK with Josh to post here.
cheers fnq
Woop if you have the time some pics it would be good, I have read about your rebuild although the pics are long gone. If it is OK with Josh to post here.
cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
yeah i'd be more than happy to take photos.
not doing a full rebuild just honing with new rings and bearings. Got my head back today thou, 6 new precombustion chambers and all the rest of stuff they do, new head bolts, vrs kit and head gasket for 700 cash! it helps to be in the industry sometimes
not doing a full rebuild just honing with new rings and bearings. Got my head back today thou, 6 new precombustion chambers and all the rest of stuff they do, new head bolts, vrs kit and head gasket for 700 cash! it helps to be in the industry sometimes
Honey i cut the car in half!
Who is online
Users browsing this forum: No registered users and 4 guests