Has anyone had a dealer change a timing chain. How much. Yes chain series 2 double overhead cam. The chain will cost $106 with no gst. +%. What about the tensioner change it too. Will do the drive belts too. But will match them from the local auto shop. Suzuki want $74 for one. A joke. Any comments price advice etc. I know my limits and will not try this.
Rob
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jimny timing chain.
Jimny timing chain.
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
www.jimny.se
Re: Jimny timing chain.
Go to repco or similar and source the belts/ chains through them. If they cannot get an aftermarket one then you will HAVE to buy genuine. Also, buy a haynes service maual and have a read. You may find that this job is simple enough to do yourself.robsjimny wrote:Has anyone had a dealer change a timing chain. How much. Yes chain series 2 double overhead cam. The chain will cost $106 with no gst. +%. What about the tensioner change it too. Will do the drive belts too. But will match them from the local auto shop. Suzuki want $74 for one. A joke. Any comments price advice etc. I know my limits and will not try this.
Rob
[url]www.twinstickoffroad.com[/url]
Service manual link is on www.jimny.se
Are you taiking about the G13 motor or the M13A?
Are you taiking about the G13 motor or the M13A?
[url]http://www.project-tinfoil.co.nz[/url]
he said it was the twin cam model, so that'd be the M13aFourdogs wrote:Service manual link is on www.jimny.se
Are you taiking about the G13 motor or the M13A?
[url]www.twinstickoffroad.com[/url]
Already have the service manaul. I'm man enough to say it's a bit too much for me. Even thoe I work with cars. Got a price from a dealer about a grand. Gaskets and tensioner needed. The service manager also said if it not making noise leave it. True or false. The belt on the single gets change at 105,000. Oh mine on 99,000.
Rob
M13A
Rob
M13A
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
www.jimny.se
chain unlike belt is only changed if it is making noise.........they will need a lot more kays than 99000 to be a worry.....
Don't worry about it Rob.....as the rubber belts wear out and break but chain will get noisey and only then would you have to worry about it.....
You say you have the workshop manual for the m13a???
Do you have the wiring diagram for the m13a and 4sp auto??
James
Don't worry about it Rob.....as the rubber belts wear out and break but chain will get noisey and only then would you have to worry about it.....
You say you have the workshop manual for the m13a???
Do you have the wiring diagram for the m13a and 4sp auto??
James
Who is online
Users browsing this forum: No registered users and 114 guests