Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

83 hilux 4x4 brakes problems

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7
Joined: Tue Jan 24, 2006 8:14 am
Location: trinidad and tobago

83 hilux 4x4 brakes problems

Post by triniHIlux »

i have a problem with my front brakes it keeps binding, i resently service them and the master cylinder and still they keep locked when i release the brakes, this thing pissin my off now i dont know what to do now :bad-words:
HELP thanks
MUD MUD AND MORE MUD
Top
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Contact:
Contact Mad Cruiser

Post by Mad Cruiser »

thought about taking it to a brake shop ?
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Top
Posts: 7
Joined: Tue Jan 24, 2006 8:14 am
Location: trinidad and tobago

Post by triniHIlux »

i think i`ll endup doin that, i was tryin to fix it myself because the labour cost in the shop is kinda expence but for safety i`ll spend the money (there goes my rims and tyres :bad-words: )
MUD MUD AND MORE MUD
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Sounds like the calipers may need overhauling?
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

yeah calipers most likely got rust ridge behind the pistons. if your trying to save some dollars pull em apart & hone em out. If not sure but go to brake shop. after all man they are YOUR BRAKES
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Posts: 187
Joined: Mon Apr 11, 2005 9:26 pm
Location: Rockhampton, QLD

Post by kevdog »

from dim memory....( an expert may help here) if ya cak up when you put the master cyl back together it can not release the pressure on the brakes when you release the pedal...try releasing the bleed screw after the brakes have locked on.... if fluid squirts out there is still pressure if not it must be in the calipers

my 2c
Fat people are harder to kidnap....
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

brakes

Post by LuxyBoy »

Just got my Hilux ('91) brakes done:
Extended Braided brake lines
80 Series master and booster
New DBA rotors
New Ultima pads
$500

STOPS ON A DIME :armsup:
I think i could do endos if i wanted :rofl:

It no longer pulls to the left under braking; when this happened it was because it would lock one wheel and leave the other released :shock:

Got mine done by "All Brake and Clutch" at Rocklea South Brisbane. I big shout out for them as they were the only people that would do it and i rang heaps. One other place said they would; but to drop it off and you will get the bill, not even an estimate would be given. (Bends over and is told there will be no lube)
Kind Regards,
Brad
Top
Posts: 7
Joined: Tue Jan 24, 2006 8:14 am
Location: trinidad and tobago

Post by triniHIlux »

thanks guys i`ll check over the calipers again
MUD MUD AND MORE MUD
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests