Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bluey white smoke
Moderators: toaddog, Elmo, DUDELUX
bluey white smoke
hi!! my dad just had his motor fully rebuilt new head the works(2h motor) every time he starts it up when it's cold it blows bluey white smoke, just wondering if anybody would know what would be causing this. he took it back to the mechanic and they have checked the glow plugs and a few small things, no problems that they can see, do the rings just need to bed in better or is that colour smoke mean problems, it's only done 1000klm's since the rebuild. thanks
1000k's is more than enough for the rings to bed in, and i dont think it shouyld have blown any smoke even if the rings werent bedded in.
I would be taking it back and demanding they they resolve the problem.
Glow plugs might explain the white smoke but not any blue smoke. Thats oil and definantly should not be there in a freshly rebuilt engine. This is why you get a warranty.
I would be taking it back and demanding they they resolve the problem.
Glow plugs might explain the white smoke but not any blue smoke. Thats oil and definantly should not be there in a freshly rebuilt engine. This is why you get a warranty.
Has the motor been reconditioned or just rebuilt? rebuild=tear down and reassemble.
What parts have been replaced?
Blue smoke indicates oil burning. White smoke indicates excess unburnt fuel. Black/grey smoke indicates overfuelling.
Blue smoke can be caused by cracked or worn rings, crook valve stem seals or excess blowby being burnt by the motor. Oil sometimes builds up in the intake manifold from the crankcase breather.
White smoke is usually a sign of either crook glow plugs, or poor compression, or extremely cold climate. It basically indicates that the fuel isnt burning properly.
What parts have been replaced?
Blue smoke indicates oil burning. White smoke indicates excess unburnt fuel. Black/grey smoke indicates overfuelling.
Blue smoke can be caused by cracked or worn rings, crook valve stem seals or excess blowby being burnt by the motor. Oil sometimes builds up in the intake manifold from the crankcase breather.
White smoke is usually a sign of either crook glow plugs, or poor compression, or extremely cold climate. It basically indicates that the fuel isnt burning properly.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
White smoke is unburnt diesel, or blocked inlet filter.....there is something real wrong here, maybe valve or pump timing is out....maybe injecters are stuffed, but if it didnt do this b4 then it shouldnt now...
White is also coolant...does it start on all 6 pistons or run on 5 for 30 seconds or so....
Andrew
White is also coolant...does it start on all 6 pistons or run on 5 for 30 seconds or so....
Andrew
this is a fully rebuilt motor $7000 worth the head is brand new same as pistons rings every possibly thing as far as i can see on the invoice, he is a very good mechanic my boss has been using him for years on his comp trucks and never had a problem. it's been back and he say's that he can't find anything wrong with it and the smoke is from a build up of oil in the valleys? thanks for your input and might get it back to him again to check a few things you guys have mentioned thanks again
Who is online
Users browsing this forum: No registered users and 4 guests