Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU CV Removal shortcuts

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

GU CV Removal shortcuts

Post by 85lux »

i need to pull the diff center out. so the axles must come out also.
i know with toyota i have just removed the circlip on the end of the axle, the wiper seals from the knuckle and the kingpin caps. then the knuckle wiggles off allowing you to remove the axle. that way i didn't touch calipers or wheel bearings. does the same apply for a GU? or must i start from the outside and work my way in to the cv, taking everything apart?

thanks
jim
Top
Posts: 24
Joined: Fri Mar 12, 2004 7:05 pm

Post by Rambo »

Ya mate thats the way you do it. I've done it the same way on my GQ and GQ's are same as GU only a little wider.
Top
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

you mean the shortcut is ok, or do i have to take it all apart??
Top
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

you mean the shortcut is ok, or do i have to take it all apart??
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

shortcut is fine..
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests